Home › Engine / Hybrid System › 1GR-FE ENGINE MECHANICAL › FRONT CRANKSHAFT OIL SEAL
RM33K0E _51 Engine / Hybrid System _043519 1GR-FE ENGINE MECHANICAL _0225345 FRONT CRANKSHAFT OIL SEAL A

1GR-FE ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11303A 1.INSTALL FRONT CRANKSHAFT OIL SEAL

a.

Apply MP grease to the lip of a new front crankshaft oil seal.


b.
A326588C02
1.927,1.688 1.698,1.688 1.698,1.688 1.604,1.323 false 1.979,1.625 2.438,1.823 0.458,0.198 10 false SST 2.375,0.458 2.594,0.615 0.219,0.156 10 false *a
*a -0.5 to 0.5 mm (-0.0197 to 0.0197 in.) (from the timing chain cover edge)


Using SST and a hammer, tap in the oil seal until its surface is flush with the timing chain cover edge.

Standard:

-0.5 to 0.5 mm (-0.0197 to 0.0197 in.) (from the timing chain cover edge)


SST
09226-10010  

NOTICE:
·

Keep the lip of the oil seal free from foreign matter.

·

Do not tap in the oil seal at an angle.




Hide 13471 2.INSTALL CRANKSHAFT PULLEY

Hide 16400 3.INSTALL RADIATOR ASSEMBLY