Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM(for Type A)
RM33K0E _58 Vehicle Interior _043552 SUPPLEMENTAL RESTRAINT SYSTEMS _0225660 AIRBAG SYSTEM(for Type A) D

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM(for Type A)  SYSTEM DESCRIPTION  


GENERAL


a.

Deceleration sensors used for the airbag system are installed on various parts of the vehicle and calculate the deceleration rate of each part during a collision.


b.

Depending on the situation, the airbag sensor assembly sends a deployment signal to each airbag based on the information from each sensor.



DEPLOYMENT CONDITION


a.

FRONTAL COLLISION

C326668E02
0.302,1.01 3.208,1.208 2.906,0.198 10 false Airbag Sensor Assembly 0.344,2.323 3.25,2.521 2.906,0.198 10 false Front Airbag Sensor 2.573,1.792 3.031,1.99 0.458,0.198 10 false AND 3.917,0.281 5.927,0.583 2.01,0.302 10 false Horn Button Assembly 3.958,1.208 6.969,1.51 3.01,0.302 10 false Instrument Panel Passenger Airbag Assembly 3.969,2.125 6.958,2.365 2.99,0.24 10 false Lower No. 1 Instrument Panel Airbag Assembly 3.99,3.083 6.25,3.365 2.26,0.281 10 false Front Seat Outer Belt Assembly

i.

Frontal collision signals are produced based on the information from the airbag sensor assembly and front airbag sensors.

HINT:

In case of a frontal collision, the SRS ignition signal could be output with the deceleration sensor ON signal even without a signal from the front airbag sensors.



ii.

Frontal collision signals are used to deploy the airbags and pretensioners in the illustration.