ILLUMINATED ENTRY SYSTEM (w/ Illuminated Entry System)
When inspecting the following functions, make sure that the map light switch is in the DOOR position.
The illuminated entry system has the following control functions:
| Control | Outline | Lighting |
|---|---|---|
|
*1: w/ Smart Entry and Start System *2: w/o Smart Entry and Start System |
||
| Door Lock/Unlock-linked | When any door is unlocked, the items listed to the right turn on. | ·
Map light assembly ·
Engine switch*1 ·
Ignition key cylinder light*2 |
| When all doors are locked, the items listed to the right turn off. | ·
Map light assembly ·
Engine switch*1 ·
Ignition key cylinder light*2 |
|
| Door Open/Close-linked | When any door is opened, the items listed to the right turn on. | ·
Map light assembly ·
Engine switch*1 ·
Ignition key cylinder light*2 |
| When all doors are closed, the items listed to the right turn off. | ·
Map light assembly ·
Engine switch*1 ·
Ignition key cylinder light*2 |
|
| Engine Switch-linked*1
Ignition Switch-linked*2 |
When the ignition switch is turned from ACC or ON to off, the items listed to the right turn on. | ·
Map light assembly ·
Engine switch*1 ·
Ignition key cylinder light*2 |
BATTERY SAVING CONTROL SYSTEM
The battery saving control system has the following control functions:
| Control | Outline | Lighting |
|---|---|---|
| Interior Light Auto Cut Function | The illumination of the items listed on the right will turn off 20 minutes after the ignition switch is turned off, regardless of whether the doors are open or closed and regardless of the map light switch position. | Map light assembly |