Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER
RM33K0E _53 Suspension _043531 REAR SUSPENSION _0226852 REAR SHOCK ABSORBER N

REAR SUSPENSION  REAR SHOCK ABSORBER  DISPOSAL  


PROCEDURE

Hide 48540 1.DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY LH

C118722C01
2.563,0.528 2.809,0.733 0.247,0.205 10 *a
*a Approximately 30 mm (1.18 in.)


HINT:

Use the same procedure for the other rear shock absorber.


a.

Fully extend the shock absorber piston rod and fix the shock absorber in place at an angle in a vise or similar tool.


b.

Using a drill or similar tool, slowly make a hole approximately 30 mm (1.18 in.) from the top end of the rear shock absorber assembly LH and discharge the gas inside of it.

NOTICE:
·

The gas is colorless, odorless and harmless.

·

Since the discharged gas may cause chips to fly off, cover the drill with a cloth when making a hole.