72020
1.INSPECT FRONT SEAT ADJUSTER ASSEMBLY LH
| *a | Component without wire harness connected
(Front Seat Adjuster Assembly LH (Front Power Seat Slide Position Motor LH)) |
Check the operation of the slide motor.
Apply battery voltage to the slide motor connector, and check that the front seat adjuster assembly LH operates smoothly as follows.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1 |
Forward |
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4 |
Backward |
If the result is not as specified, replace the front seat adjuster assembly LH.
| *a | Component without wire harness connected
(Front Seat Adjuster Assembly LH (Front Power Seat Tilt Position Motor LH)) |
Check the operation of the front vertical motor.
Apply battery voltage to the front vertical motor connector, and check that the front seat adjuster assembly LH operates smoothly as follows.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1 |
Upward |
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4 |
Downward |
If the result is not as specified, replace the front seat adjuster assembly LH.
| *a | Component without wire harness connected
(Front Seat Adjuster Assembly LH (Front Power Seat Lift Position Motor LH)) |
Check the operation of the rear lifter motor.
Apply battery voltage to the rear lifter motor connector, and check that the front seat adjuster assembly LH operates smoothly as follows.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1 |
Upward |
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2 |
Downward |
If the result is not as specified, replace the front seat adjuster assembly LH.
72010
2.INSPECT FRONT SEAT ADJUSTER ASSEMBLY RH
| *a | Component without wire harness connected
(Front Seat Adjuster Assembly RH (Front Power Seat Slide Position Motor RH)) |
Check the operation of the slide motor.
Apply battery voltage to the slide motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1 |
Forward |
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4 |
Backward |
If the result is not as specified, replace the front seat adjuster assembly RH.
| *a | Component without wire harness connected
(Front Seat Adjuster Assembly RH (Front Power Seat Tilt Position Motor RH)) |
Check the operation of the front vertical motor.
Apply battery voltage to the front vertical motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1 |
Upward |
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4 |
Downward |
If the result is not as specified, replace the front seat adjuster assembly RH.
| *a | Component without wire harness connected
(Front Seat Adjuster Assembly RH (Front Power Seat Lift Position Motor RH)) |
Check the operation of the rear lifter motor.
Apply battery voltage to the rear lifter motor connector, and check that the front seat adjuster assembly RH operates smoothly as follows.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1 |
Upward |
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2 |
Downward |
If the result is not as specified, replace the front seat adjuster assembly RH.
71014S
3.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY LH
| *a | Component without wire harness connected
(Front Seatback Frame Sub-assembly LH (Front Power Seat Reclining Position Motor LH)) |
Check the operation of the reclining motor.
Apply battery voltage to the reclining motor connector, and check that the front seatback frame sub-assembly LH operates smoothly as follows.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1 |
Forward |
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4 |
Backward |
If the result is not as specified, replace the front seat seatback frame sub-assembly LH.
71013S
4.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY RH
| *a | Component without wire harness connected
(Front Seatback Frame Sub-assembly RH (Front Power Seat Reclining Position Motor RH)) |
Check the operation of the reclining motor.
Apply battery voltage to the reclining motor connector, and check that the front seatback frame sub-assembly RH operates smoothly as follows.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1 |
Forward |
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4 |
Backward |
If the result is not as specified, replace the front seat seatback frame sub-assembly RH.