Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR
RM33K0E _59 Vehicle Exterior _043561 WIPER / WASHER _0227138 FRONT WIPER MOTOR G

WIPER / WASHER  FRONT WIPER MOTOR  INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Make sure that fingers or articles of clothing do not get caught in moving parts when performing this test.


PROCEDURE

Hide 85110 1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)

a.
E132856C17
2.396,0.615 2.052,0.958 true 1.323,1.74 1.5,1.458 true 1.906,1.458 2.104,1.75 true 2.5,0.51 2.688,0.688 0.188,0.177 10 false +1 2.083,1.792 2.271,1.958 0.188,0.167 10 false +2 1.219,1.781 1.365,1.948 0.146,0.167 10 false E 0.188,0.104 0.375,0.281 0.188,0.177 10 false *a
*a Component without harness connected (Windshield Wiper Motor Assembly)


Check the LO operation.

i.

Apply battery voltage to the windshield wiper motor connector and check the speed of the windshield wiper motor assembly.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1 (+1)
Battery negative (-) → Terminal 5 (E)
Motor operates at low speed


If the result is not as specified, replace the windshield wiper motor assembly.



b.

Check the HI operation.

i.

Apply battery voltage to the windshield wiper motor connector and check the speed of the windshield wiper motor assembly.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 4 (+2)
Battery negative (-) → Terminal 5 (E)
Motor operates at high speed


If the result is not as specified, replace the windshield wiper motor assembly.



Hide 85110 2.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)

a.
E132856C15
1.542,1.438 1.333,1.75 true 0.979,0.635 1.375,0.948 true 1.906,1.458 2.125,1.729 true 1.25,1.802 1.438,1.979 0.188,0.177 10 false +1 0.76,0.521 0.948,0.688 0.188,0.167 10 false +2 2.115,1.802 2.26,1.969 0.146,0.167 10 false E 0.188,0.104 0.375,0.281 0.188,0.177 10 false *a
*a Component without harness connected (Windshield Wiper Motor Assembly)


Check the LO operation.

i.

Apply battery voltage to the windshield wiper motor connector and check the speed of the windshield wiper motor assembly.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 5 (+1)
Battery negative (-) → Terminal 4 (E)
Motor operates at low speed


If the result is not as specified, replace the windshield wiper motor assembly.



b.

Check the HI operation.

i.

Apply battery voltage to the windshield wiper motor connector and check the speed of the windshield wiper motor assembly.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 3 (+2)
Battery negative (-) → Terminal 4 (E)
Motor operates at high speed


If the result is not as specified, replace the windshield wiper motor assembly.