Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR
RM33K0E _59 Vehicle Exterior _043561 WIPER / WASHER _0227143 WASHER MOTOR A

WIPER / WASHER  WASHER MOTOR  INSTALLATION  


PROCEDURE

Hide 85330 1.INSTALL WINDSHIELD WASHER JAR ASSEMBLY

a.
B407663E01
3.219,0.146 3.375,0.344 0.156,0.198 10 true 1 0.24,3.198 0.438,3.427 0.198,0.229 10 true 3 1.208,0.052 1.396,0.26 0.188,0.208 10 true 2

Install the windshield washer jar assembly with the 3 bolts in the order indicated in the illustration.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


b.

Attach the clamp.


Hide 85301 2.INSTALL WASHER INLET SUB-ASSEMBLY

a.
B407664C01
0,0 0,0 false
V113147

Install in this Direction


Install the washer inlet sub-assembly to the windshield washer jar assembly.


b.

Attach the claw and guide.


Hide 85310 3.INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.
B407665C01
0,0 0,0 false
V100135

Connector
V100136

Rear Washer Hose
V113147

Install in this Direction


Install the windshield washer motor and pump assembly.


b.

Connect the connector.


c.

Connect the rear washer hose.


d.
B407666

Connect the front washer hose.


e.
B407667C01
0,0 0,0 false
V100135

Clip
V100136

Screw
V113147

Return in this Direction


Return the front fender liner LH to its original position as shown in the illustration.


f.

Install the 10 clips.


g.

Install the 3 screws.


h.
B407668C01
0.938,2.021 1.25,2.177 0.313,0.156 10 false *a 1.719,2.031 2.031,2.188 0.313,0.156 10 false *b
*a Correct
*b Incorrect


Install the pin hold clip as shown in the illustration.


Hide 4.FILL UP WINDSHIELD WASHER JAR WITH WASHER FLUID

a.

Refill the windshield washer fluid.