Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR
RM33K0E _59 Vehicle Exterior _043561 WIPER / WASHER _0227143 WASHER MOTOR G

WIPER / WASHER  WASHER MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85310 1.INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY (for Front Side)

HINT:

This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly.


a.

With the windshield washer motor and pump assembly installed to the washer jar, pour windshield washer fluid into the washer jar.


b.
B400512C01
0.458,0.229 0.771,0.385 0.313,0.156 10 false *a
*a Component without harness connected (Windshield Washer Motor and Pump Assembly)


Check that the windshield washer fluid is pumped when battery voltage is applied to the terminals.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Washer fluid is pumped to front side


If the result is not as specified, replace the windshield washer motor and pump assembly.


Hide 85310 2.INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY (for Rear Side)

HINT:

This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly.


a.

With the windshield washer motor and pump assembly installed to the washer jar, pour windshield washer fluid into the washer jar.


b.
B400512C01
0.458,0.229 0.771,0.385 0.313,0.156 10 false *a
*a Component without harness connected (Windshield Washer Motor and Pump Assembly)


Check that the windshield washer fluid is pumped when battery voltage is applied to the terminals.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Washer fluid is pumped to rear side


If the result is not as specified, replace the windshield washer motor and pump assembly.