85345R
1.INSPECT REAR WASHER NOZZLE
With the engine switch turned on (IG), check that the center stream of washer fluid sprays on the back door glass within the hatched area shown in the illustration.
Washer fluid hits the back door glass in the area shown in the illustration.
If the result is not as specified, adjust the rear washer nozzle sub-assembly.
|
Standard Clearance | - | - |
| Area | Specified Condition | Area | Specified Condition |
|---|---|---|---|
| A | 78.9 mm (3.1063 in.) | B | 126.5 mm (4.9803 in.) |
If the result is not as specified, adjust the rear washer nozzle.
Click hereVehicle Exterior>WIPER / WASHER>WASHER NOZZLE(for Rear Side)>ADJUSTMENT