76875
1.INSTALL REAR NO. 4 SPOILER PROTECTOR
When installing the rear No. 4 spoiler protector, heat the rear spoiler using a heat light.
| Item | Temperature |
|---|---|
| Rear Spoiler | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Clean the rear spoiler surface.
Using a heat light, heat the rear spoiler surface.
Remove the double-sided tape from the rear spoiler.
Wipe off any tape adhesive residue with cleaner.
Install 2 new rear No. 4 spoiler protectors.
Using a heat light, heat the rear spoiler.
Remove the peeling paper from the face of the 2 rear No. 4 spoiler protectors.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Install the 2 rear No. 4 spoiler protectors as shown in the illustration.
Press the rear No. 4 spoiler protector firmly to install it.
76872
2.INSTALL REAR NO. 1 SPOILER PROTECTOR
When installing the rear No. 1 spoiler protector, heat the rear spoiler using a heat light.
| Item | Temperature |
|---|---|
| Rear Spoiler | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Clean the rear spoiler surface.
Using a heat light, heat the rear spoiler surface.
Remove the double-sided tape from the rear spoiler.
Wipe off any tape adhesive residue with cleaner.
| *a | Mark-off Line |
Install a new rear No. 1 spoiler protector.
Using a heat light, heat the rear spoiler.
Remove the peeling paper from the face of the rear No. 1 spoiler protector.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Align the rear No. 1 spoiler protector with the mark-off line of the rear spoiler, and then install it.
Press the rear No. 1 spoiler protector firmly to install it.
76873
3.INSTALL REAR NO. 2 SPOILER PROTECTOR
When installing the rear No. 2 spoiler protector, heat the rear spoiler using a heat light.
| Item | Temperature |
|---|---|
| Rear Spoiler | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Clean the rear spoiler surface.
Using a heat light, heat the rear spoiler surface.
Remove the double-sided tape from the rear spoiler.
Wipe off any tape adhesive residue with cleaner.
| *a | Mark-off Line |
Install 7 new rear No. 2 spoiler protectors.
Using a heat light, heat the rear spoiler.
Remove the peeling paper from the face of the 7 rear No. 2 spoiler protectors.
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
Align the 7 rear No. 2 spoiler protectors with the mark-off line of the rear spoiler, and then install it.
Press the rear No. 2 spoiler protector firmly to install it.
81570
4.INSTALL CENTER STOP LIGHT ASSEMBLY