Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROOF DRIP SIDE FINISH MOULDING
RM33K0E _59 Vehicle Exterior _043564 EXTERIOR PANELS / TRIM _0227160 ROOF DRIP SIDE FINISH MOULDING A

EXTERIOR PANELS / TRIM  ROOF DRIP SIDE FINISH MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 63470A 1.REMOVE ROOF RACK ASSEMBLY LH (w/ Roof Rack)

Hide 75552 2.REMOVE ROOF DRIP SIDE FINISH MOULDING LH (w/ Roof Rack)

a.
B409524C01
1.073,1.406 1.156,1.344 false
V100155

Protective Tape


Put protective tape around the roof drip side finish moulding LH.


b.
B409525

Using moulding remover D, detach the clip and remove the roof drip side finish moulding LH.

NOTICE:
·

When removing the roof drip side finish moulding LH, be careful not to damage the clips.

·

If a clip is damaged or becomes detached from the vehicle, replace it with a new one.




Hide 75552 3.REMOVE ROOF DRIP SIDE FINISH MOULDING LH (w/o Roof Rack)

a.
B414853C01
0,0 0,0 false
V100155

Protective Tape


Put protective tape around the roof drip side finish moulding LH.


b.
B414854

Using moulding remover D, detach the clip and remove the roof drip side finish moulding LH.

NOTICE:
·

When removing the roof drip side finish moulding LH, be careful not to damage the clips.

·

If a clip is damaged or becomes detached from the vehicle, replace it with a new one.