Home › Drivetrain › CLUTCH › CLUTCH PEDAL SWITCH
RM33K0E _52 Drivetrain _043527 CLUTCH _0227296 CLUTCH PEDAL SWITCH A

CLUTCH  CLUTCH PEDAL SWITCH  INSTALLATION  


PROCEDURE

Hide 88280A 1.INSTALL CLUTCH SWITCH ASSEMBLY

a.

Temporarily install the clutch switch assembly.


b.

Tighten the adjusting nut to the specified torque.

Torque:
15.7 N*m (160 kgf*cm, 12 ft.*lbf)


c.

Connect the clutch switch assembly connector.


Hide 84520 2.INSTALL CLUTCH START SWITCH ASSEMBLY

a.

Temporarily install the clutch start switch assembly.


b.
C223751

Adjust the clutch start switch assembly position so that the clearance shown in the illustration between the clutch start switch assembly and cushion is within the specified range.

Standard clearance:

0.6 to 1.0 mm (0.0236 to 0.0394 in.)


NOTICE:

Before performing the clutch start switch assembly adjustment, adjust the pedal free play.

Click hereDrivetrain>CLUTCH>CLUTCH PEDAL>ADJUSTMENT



c.

Tighten the adjusting nut to the specified torque.

Torque:
15.7 N*m (160 kgf*cm, 12 ft.*lbf)


d.

Connect the clutch start switch assembly connector.