Home › Steering › POWER ASSIST SYSTEMS › VANE PUMP(for 1GR-FE)
RM33K0E _55 Steering _043538 POWER ASSIST SYSTEMS _0227298 VANE PUMP(for 1GR-FE) A

POWER ASSIST SYSTEMS  VANE PUMP(for 1GR-FE)  DISASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:
·

When using a vise, place aluminum plates between the part and vise.

·

When using a vise, do not overtighten it.



PROCEDURE

Hide 44320 1.SECURE VANE PUMP ASSEMBLY

a.
F042477N02
2.375,1.385 1.854,1.385 false 2.438,1.302 2.802,1.5 0.365,0.198 10 false SST

Using a SST, secure the vane pump assembly.

SST
09630-00014  (09631-00132)


Hide 2.REMOVE FLOW CONTROL VALVE

a.

Using a 27 mm socket wrench, remove the pressure port union from the front housing.


b.

Using a screwdriver, remove the O-ring from the pressure port union.


c.

Remove the flow control valve from the front housing.


d.

Remove the flow control valve compression spring from the front housing.


Hide 3.REMOVE POWER STEERING SUCTION PORT UNION

a.

Remove the bolt and steering suction port union.


b.

Remove the O-ring from the steering suction port union.


Hide 4.REMOVE REAR HOUSING

a.

Remove the 4 bolts and rear housing from the front housing.


b.

Remove the O-ring from the rear housing.


Hide 5.REMOVE SHAFT WITH PULLEY

NOTICE:

Be careful not to drop or badly damage the pulley shaft. If damaged, replace it with a new one.


a.

Using a screwdriver, remove the vane pump shaft snap ring from the shaft with pulley.


b.

Remove the shaft with pulley from the front housing.


Hide 6.REMOVE VANE PUMP ROTOR

a.

Remove the 10 vane pump plates from the vane pump rotor.

NOTICE:

Be careful not to drop the vane pump plates.



b.

Remove the vane pump rotor from the front housing.


Hide 7.REMOVE VANE PUMP CAM RING

NOTICE:

Be careful not to drop or badly damage the oil pressure switch. If damaged, replace it with a new one.


Hide 8.REMOVE FRONT VANE PUMP SIDE PLATE

a.

Remove the front vane pump side plate from the front housing.


b.
C065368

Remove the O-ring from the front vane pump side plate.


c.
F051267

Remove the O-ring from the front housing.


Hide 9.REMOVE VANE PUMP HOUSING OIL SEAL

a.
F051268C01
0.906,0.75 0.542,0.542 true 0.323,0.427 0.635,0.625 0.313,0.198 10 false *a
*a Cloth


Using a screwdriver, pry out the vane pump housing oil seal.

NOTICE:

Be careful not to damage the front vane pump housing.