51410
1.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY
51442
2.REMOVE NO. 2 ENGINE UNDER COVER
3.REMOVE FRONT WHEEL LH
53737B
4.REMOVE FRONT FENDER APRON SEAL LH
Detach the 6 clips and remove the front fender apron seal LH.
44348A
5.DISCONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE
Slide the clip and disconnect the No. 1 oil reservoir to pump hose.
Drain the power steering fluid.
44410
6.DISCONNECT PRESSURE FEED TUBE ASSEMBLY
Using a union nut wrench, disconnect the pressure feed tube from the vane pump assembly.
44320
7.REMOVE VANE PUMP ASSEMBLY
Remove the 2 nuts and vane pump assembly.
Remove the O-ring.