Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)
RM33K0E _58 Vehicle Interior _043555 HEATING / AIR CONDITIONING _0227347 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  B14B3  Lost Communication with Rear Panel LIN  


DESCRIPTION

The integration control and panel assembly communicates with the air conditioning amplifier assembly through the LIN communication system.

If the LIN communication system malfunctions, the air conditioning amplifier assembly does not operate even if the integration control and panel assembly is operated.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
B14B3 Lost Communication with Rear Panel LIN Lost communication with the integration control and panel assembly.
·

Harness or connector

·

LIN communication system

·

Integration control and panel assembly

·

Air conditioning amplifier assembly


Memorized (10 seconds or more) -

HINT:

The air conditioning amplifier assembly stores the DTC of the respective malfunction if it has occurred for the period of time indicated in the parentheses.


WIRING DIAGRAM

E313779E05
5.406,1.552 5.865,1.75 0.458,0.198 10 false G37 5.406,1.708 6.979,2.073 1.573,0.365 10 false Air Conditioning Amplifier Assembly 2.469,0.531 3.802,0.719 1.333,0.188 10 false ECU-IG NO.4 3.573,0.375 4.906,0.563 1.333,0.188 10 false from IG1 NO.1 Relay 0.063,1.542 0.521,1.74 0.458,0.198 10 false N34 0.073,1.708 2.76,1.938 2.688,0.229 10 false Integration Control and Panel Assembly 5.594,0.646 6.052,0.844 0.458,0.198 10 false LIN1 1.417,0.271 1.875,0.469 0.458,0.198 10 false IG+ 1.354,0.646 1.813,0.844 0.458,0.198 10 false LIN1 1.75,1.042 2.208,1.24 0.458,0.198 10 false 5 1.354,1.042 1.813,1.24 0.458,0.198 10 false GND 1.75,0.635 2.208,0.833 0.458,0.198 10 false 6 1.75,0.271 2.208,0.469 0.458,0.198 10 false 8 0.792,2.469 2.99,2.667 2.198,0.198 10 false : LIN Communication Line 5.323,0.635 5.781,0.833 0.458,0.198 10 false 37 6.49,0.771 6.948,0.969 0.458,0.198 10 false AD 0.469,0.76 0.927,0.958 0.458,0.198 10 false CPU

CAUTION / NOTICE / HINT

NOTICE:
·

Inspect the fuses for circuits related to this system before performing the following procedure.

·

When the servo motor or air conditioning amplifier assembly is replaced, be sure to perform servo motor initialization.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>INITIALIZATION



PROCEDURE

1.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING CONTROL ASSEMBLY - BATTERY AND BODY GROUND)
a.
E320974C01
1.448,0.302 1.938,0.552 0.49,0.25 0.958,1.833 1.292,1.833 1.292,1.833 1.5,1.5 true 2.448,1.833 2.115,1.833 2.115,1.833 1.948,1.5 true 1.573,0.344 2.031,0.542 0.458,0.198 10 false N34 0.635,1.75 1.094,1.948 0.458,0.198 10 false GND 2.5,1.74 2.958,1.938 0.458,0.198 10 false IG+
*a Front view of wire harness connector
(to Integration Control and Panel Assembly)


Disconnect the integration control and panel assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
N34-5 (GND) - Body ground Always Below 1 Ω



c.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
N34-8 (IG+) - Body ground Ignition switch off Below 1 V
N34-8 (IG+) - Body ground Ignition switch ON 11 to 14 V



Result:
Proceed to
OK
NG



OK

2.CHECK HARNESS AND CONNECTOR (INTEGRATION CONTROL AND PANEL ASSEMBLY - AIR CONDITIONING AMPLIFIER ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.CHECK HARNESS AND CONNECTOR (INTEGRATION CONTROL AND PANEL ASSEMBLY - AIR CONDITIONING AMPLIFIER ASSEMBLY)
a.

Disconnect the N34 integration control and panel assembly connector.


b.

Disconnect the G37 air conditioning amplifier assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
N34-6 (LIN1) - G37-37 (LIN1) Always Below 1 Ω
N34-6 (LIN1) or G37-37 (LIN1) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

3.CHECK INTEGRATION CONTROL AND PANEL ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK INTEGRATION CONTROL AND PANEL ASSEMBLY
a.

Replace the integration control and panel assembly.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>REAR BLOWER CONTROL SWITCH>REMOVAL


b.

When troubleshooting according to the DTC:

i.

Check for DTCs.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR

Body Electrical > Air Conditioner > Trouble Codes
50001 121
OK:

DTC B14B3 is not output.




c.

When troubleshooting according to Problem Symptoms Table:

i.

Check the air conditioning control assembly operates normally.

HINT:

Since the air conditioning control assembly cannot be inspected while it is removed from the vehicle, replace the air conditioning control assembly with a new or known good one and check that the condition returns to normal.


OK:

Air conditioning control assembly operation returns to normal.




Result:
Result Proceed to
OK A
NG (When troubleshooting according to the DTC) B
NG (When troubleshooting according to Problem Symptoms Table) C



A

END (INTEGRATION CONTROL AND PANEL ASSEMBLY IS DEFECTIVE)

B

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY

C