Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM
RM33K0E _56 Audio / Visual / Telematics _043543 PARK ASSIST / MONITORING _0227352 TOYOTA PARKING ASSIST-SENSOR SYSTEM U

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM  TERMINALS OF ECU  


CLEARANCE WARNING ECU ASSEMBLY


E283066N05
3.323,0.333 3.823,0.583 0.5,0.25 3.438,0.375 3.896,0.573 0.458,0.198 10 false G88

a.

Disconnect the G88 clearance warning ECU assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G88-11 (IG) - Body ground R - Body ground IG power source signal
·

Ignition switch ON

·

Back sonar or clearance sonar switch assembly off


Below 1 V
·

Ignition switch ON

·

Back sonar or clearance sonar switch assembly on


11 to 14 V
G88-16 (E) - Body ground BR - Body ground Ground Always Below 1 Ω
G88-21 (RL) - Body ground R - Body ground Reverse position signal
·

Ignition switch ON

·

Shift lever in any position other than R


Below 1 V
·

Ignition switch ON

·

Shift lever in R


11 to 14 V


c.

Reconnect the G88 clearance warning ECU assembly connector.


d.

Measure the voltage and resistance, and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G88-2 (ER) - Body ground B - Body ground Clearance warning buzzer signal When sonar detects obstacle (buzzer sounds) Pulse generation
(See waveform 1)
G88-1 (BBZ) - Body ground W - Body ground Power source of clearance warning buzzer
·

Ignition switch ON

·

Back sonar or clearance sonar switch assembly on


11 to 14 V
G88-12 (BOR) - Body ground V - Body ground Power source for rear center sensor circuit Ignition switch off Below 1 V
·

Ignition switch ON

·

Back sonar or clearance sonar switch assembly on


7.2 to 8.8 V
G88-13 (E1) - Body ground L - Body ground Ground for sensor (Rear center sensor) Always Below 1 Ω
G88-14 (SOR) - Body ground G - Body ground Sensor communication signal (Rear center sensor)
·

Ignition switch ON

·

Back sonar or clearance sonar switch assembly on

·

Shift lever in R


Pulse generation
(See waveform 2)


e.

Using an oscilloscope, check waveform.

i.
E324896N01
0.031,1.51 0.49,1.708 0.458,0.198 10 false GND

Waveform 1 (Reference)

Item Content
Terminal No. (Symbol) G88-2 (ER) - Body ground
Tool Setting 2 V/DIV., 200 μsec./DIV.
Vehicle Condition When sonar detects obstacle (buzzer sounds)


ii.
E235241N01
0.156,0.938 0.594,1.177 0.438,0.24 10 GND

Waveform 2 (Reference)

Item Content
Terminal No. (Symbol) G88-14 (SOR) - Body ground
Tool Setting 5 V/DIV., 1 msec./DIV.
Condition
·

Ignition switch ON

·

Back sonar or clearance sonar switch assembly on

·

Shift lever in R