Home › Vehicle Interior › LIGHTING (INT) › VANITY LIGHT BULB
RM33K0E _58 Vehicle Interior _043549 LIGHTING (INT) _0227552 VANITY LIGHT BULB A

LIGHTING (INT)  VANITY LIGHT BULB  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81340 1.DISCONNECT VANITY LIGHT ASSEMBLY

a.
E314032C03
1.219,1.063 0.792,0.688 true 0.594,0.521 0.823,0.698 0.229,0.177 10 true *a
*a Protective Tape
V113147

Remove in this Direction


Using a thin-bladed screwdriver, detach the claw and guide and disconnect the vanity light assembly.

HINT:

Tape the thin-bladed screwdriver tip before use.



Hide 81340B 2.REMOVE VANITY LIGHT BULB

a.
E314012C02
0,0 0,0 false
V113147

Remove in this Direction


Remove the vanity light bulb from the vanity light bulb holder.


Hide 81340B 3.INSTALL VANITY LIGHT BULB

a.
E314013C02
0,0 0,0 false
V113147

Install in this Direction


Install the vanity light bulb to the vanity light bulb holder.


Hide 81340 4.CONNECT VANITY LIGHT ASSEMBLY

a.
E314037C02
0,0 0,0 false
V113147

Install in this Direction


Attach the guide and claw to connect the vanity light assembly.