Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81230B
1.REMOVE COURTESY LIGHT BULB
| *1 | Housing |
| *2 | Cover |
| *3 | Lens |
| *a | Protective Tape |
Using a screwdriver, detach the claw.
Tape the screwdriver tip before use.
Remove the housing and cover as shown in the illustration.
| *1 | Housing |
| *2 | Cover |
Pull the cover from the housing as shown in the illustration.
| *1 | Housing |
Remove the courtesy light bulb from the housing.