Home › Vehicle Interior › INTERIOR PANELS / TRIM › UPPER INSTRUMENT PANEL
RM33K0E _58 Vehicle Interior _043557 INTERIOR PANELS / TRIM _0227571 UPPER INSTRUMENT PANEL A

INTERIOR PANELS / TRIM  UPPER INSTRUMENT PANEL  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 55950G 1.REMOVE DEFROSTER NOZZLE ASSEMBLY

a.
B437612C01
0.063,0.948 0.292,1.115 0.229,0.167 10 true *a 1.604,1.833 1.833,2 0.229,0.167 10 true *a 3.146,1.073 3.375,1.24 0.229,0.167 10 true *a
*a Screw <C>


Remove the 3 screws <C> and defroster nozzle assembly.


Hide 55084E 2.REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY

a.
B437614C01
3.156,0.75 3.375,0.906 0.219,0.156 10 true *a 2.948,1.75 3.167,1.906 0.219,0.156 10 true *a 1.552,1.823 1.771,1.979 0.219,0.156 10 true *a
*a Screw <C>


Remove the 3 screws <C> and No. 1 heater to register duct sub-assembly.


Hide 55085 3.REMOVE NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY

a.
B437613C01
0.198,0.708 0.406,0.865 0.208,0.156 10 true *a 0.354,1.719 0.563,1.875 0.208,0.156 10 true *a 1.594,1.865 1.927,2.042 0.333,0.177 10 true *a
*a Screw <C>


Remove the 3 screws <C> and No. 2 heater to register duct sub-assembly.


Hide 55844 4.REMOVE NO. 2 HEATER TO REGISTER DUCT

a.
B437615

w/o Navigation System:

i.

Remove the No. 2 heater to register duct.



b.
B437616

w/ Navigation System:

i.

Detach the clamp and remove the No. 2 heater to register duct.



Hide 86860 5.REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)

Hide 55670A 6.REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

a.
B437617C01
1.375,0.667 1.573,0.833 0.198,0.167 10 true *a 0.073,0.802 0.26,0.969 0.188,0.167 10 true *b 1.604,1.74 1.792,1.906 0.188,0.167 10 true *b 3.156,1.229 3.344,1.396 0.188,0.167 10 true *b 2.323,0.26 2.51,0.427 0.188,0.167 10 true *b 0.906,0.25 1.094,0.417 0.188,0.167 10 true *b
*a Connector
*b Screw <C>


Disconnect the connector and detach the clamp.


b.

Remove the 5 screws <C> and center instrument panel register assembly.


Hide 55660 7.REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

a.
B437619C01
1.823,0.167 2.031,0.333 0.208,0.167 10 true *a 2.833,1.021 3.042,1.188 0.208,0.167 10 true *a 1.333,1.875 1.542,2.042 0.208,0.167 10 true *a
*a Screw <C>


Remove the 3 screws <C> and No. 2 instrument panel register assembly.


Hide 55650 8.REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

a.
B437618C01
1.875,0.25 2.073,0.427 0.198,0.177 10 true *a 0.469,1.042 0.667,1.219 0.198,0.177 10 true *a 1.875,1.844 2.073,2.021 0.198,0.177 10 true *a
*a Screw <C>


Remove the 3 screws <C> and No. 1 instrument panel register assembly.


Hide 55356C 9.REMOVE NO. 2 INSTRUMENT PANEL CUSHION

a.
B437620

for Driver Side:

Remove the No. 2 instrument panel cushion.


b.
B437621

for Passenger Side:

Remove the No. 2 instrument panel cushion.


Hide 55357B 10.REMOVE NO. 3 INSTRUMENT PANEL CUSHION

a.
B437622

Remove the No. 3 instrument panel cushion.


Hide 55355 11.REMOVE NO. 1 INSTRUMENT PANEL CUSHION

a.

Remove the No. 1 instrument panel cushion.

B437623


Hide 55359C 12.REMOVE NO. 5 INSTRUMENT PANEL CUSHION

a.

Remove the No. 5 instrument panel cushion.

B437624


Hide 55368C 13.REMOVE METER MOUNTING BRACKET

a.
B437626C01
1.479,0.156 1.698,0.344 0.219,0.188 10 true *a
*a Screw <C>


for LH Side:

i.

Remove the screw <C> and meter mounting bracket.



b.
B437625C01
1.531,0.208 1.75,0.365 0.219,0.156 10 true *a
*a Screw <C>


for RH Side:

i.

Remove the screw <C> and meter mounting bracket.



Hide 82142 14.REMOVE NO. 2 INSTRUMENT PANEL WIRE

a.

Disconnect the connector and detach the clamp.


b.

Using a screwdriver with the tip wrapped with protective tape, release the airbag connector lock.


c.

Disconnect the airbag connector to remove the No. 2 instrument panel wire from the instrument panel passenger without door airbag assembly.

NOTICE:

When disconnecting any airbag connector, take care not to damage the airbag wire harness.


B437627C01
4.844,2.292 4.594,2.042 true 3.604,1.188 3.823,0.969 true 3.917,1.792 4.125,1.958 0.208,0.167 10 true *a 3.667,0.406 3.979,0.563 0.313,0.156 10 false *b 3.479,1.146 3.656,1.323 0.177,0.177 10 true *c 4.458,1.885 4.771,2.042 0.313,0.156 10 false *d 0.979,2.188 1.188,2.354 0.208,0.167 10 true *a 0.104,2.167 0.313,2.333 0.208,0.167 10 true *a
*a Connector *b Airbag Connector
*c Protective Tape *d Connector Lock



Hide 73960A 15.REMOVE INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY

Hide 55474B 16.REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH

a.
B437628C01
0.063,1.125 0.25,1.323 0.188,0.198 10 true *a 3.156,1.344 3.344,1.542 0.188,0.198 10 true *a 2.771,1.542 2.958,1.74 0.188,0.198 10 true *a 0.448,1.656 0.635,1.854 0.188,0.198 10 true *a
*a Screw <C>


Remove the 4 screws <C> and instrument cluster finish panel garnish.


Hide 55557A 17.REMOVE GLOVE COMPARTMENT DOOR CHECK CUSHION

HINT:

Use the same procedure for both glove compartment door check cushions.


a.
B437629

Remove the glove compartment door check cushion.