Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › FRONT PROPELLER SHAFT ASSEMBLY(for TASA Made)
RM33K0E _52 Drivetrain _043594 DRIVE SHAFT / PROPELLER SHAFT _0229191 FRONT PROPELLER SHAFT ASSEMBLY(for TASA Made) A

DRIVE SHAFT / PROPELLER SHAFT  FRONT PROPELLER SHAFT ASSEMBLY(for TASA Made)  REMOVAL  


PROCEDURE

Hide 51407A 1.REMOVE NO.3 ENGINE UNDER COVER (w/ Cover)

Hide 51561D 2.REMOVE PROPELLER SHAFT GUARD

a.
C330847

Remove the 2 bolts and propeller shaft guard.


b.
C330846

Remove the 2 bolts and propeller shaft guard bracket LH.

HINT:
·

Perform this procedure only when replacement of the propeller shaft guard bracket is necessary.

·

Use the same procedure for the RH and LH sides.




Hide 37140 3.REMOVE FRONT PROPELLER SHAFT ASSEMBLY

a.
C330845C02
1.677,1.333 1.427,1.75 1.427,1.75 1.615,1.177 true 1.344,1.781 1.656,1.979 0.313,0.198 10 true *a
*a Matchmark


Place matchmarks on the propeller shaft flange and transfer flange.


b.

Remove the 4 nuts and 4 washers.


c.
C330844C02
1.604,1.333 1.156,1.76 1.156,1.76 1.604,1.479 true 1.042,1.781 1.354,1.979 0.313,0.198 10 true *a
*a Matchmark


Place matchmarks on the propeller shaft flange and differential flange.


d.

Remove the 4 bolts, 4 nuts and 4 washers.


e.

Remove the front propeller shaft assembly.