71512S
1.INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)
Refer to the precautions on wrinkles to avoid creating any on the separate type front seat cushion cover when installing the seat cover.
As shown in the illustration, fix all of the cover seam allowances in the same direction.
Temporarily install the separate type front seat cushion cover to the separate type front seat cushion pad.
Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 18 new hog rings in the order shown in the illustration.
| *1 | Hog Ring Pliers | - | - |
| *a | Cutout | - | - |
Using hog ring pliers, connect the 2 straps of the separate type front seat cushion cover to the separate type front seat cushion pad with 2 new hog rings.
Do not dirty or damage the separate type front seatback cover.
Securely tighten the hog rings as shown in the illustration while making sure wrinkles do not form in the center of the fabric and separate type front seatback pad.
| *1 | Hog Ring Pliers | - | - |
2.INSTALL SEAT CUSHION COVER WITH PAD
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
71013S
3.INSTALL FRONT SEATBACK FRAME SUB-ASSEMBLY RH
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
71861
4.INSTALL FRONT SEAT INNER CUSHION SHIELD RH
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
73230
5.INSTALL FRONT SEAT INNER BELT ASSEMBLY RH
71811D
6.INSTALL FRONT SEAT CUSHION SHIELD RH
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
72525A
7.INSTALL RECLINING ADJUSTER RELEASE HANDLE RH
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
8.INSTALL FRONT SEAT ASSEMBLY RH