Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat)
RM33K0E _58 Vehicle Interior _043554 SEAT BELT _0229921 FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat) G

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY(for Manual Seat)  INSPECTION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedures listed below are for LHD vehicles.



PROCEDURE

Hide 73230 1.INSPECT FRONT SEAT INNER BELT ASSEMBLY RH

a.

Measure the resistance according to the value(s) in the table below.

B405991C01
2.563,0.906 2.979,1.323 true 2.354,0.906 1.854,1.313 true 2.271,0.125 2.583,0.281 0.313,0.156 10 false *a 4.406,0.208 4.719,0.365 0.313,0.156 10 false *b 0.073,0.063 0.385,0.219 0.313,0.156 10 false *c 3.063,1.313 3.219,1.469 0.156,0.156 10 false E 1.677,1.302 1.833,1.5 0.156,0.198 10 false +
*a Connector A *b Connector B
*c Component without harness connected
(Front Seat Inner Belt Assembly RH)
- -


Standard Resistance:
Tester Connection Condition Specified Condition
A-2(E) - B-3 Seat belt unfastened Below 1 Ω
A-2(E) - B-3 Seat belt fastened 10 kΩ or higher
A-3 (+) - B-1 Always Below 1 Ω


If the result is not as specified, replace the front seat inner belt assembly RH.


Hide 73240 2.INSPECT FRONT SEAT INNER BELT ASSEMBLY LH

a.
B276073C03
0.044,0.0 0.299,0.255 0.255,0.255 10 *a
*a Component without harness connected
(Front Seat Inner Belt Assembly LH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Seat belt unfastened Below 1 Ω
2 - 3 Seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the front seat inner belt assembly LH.