Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Replace any other damaged parts as necessary.
1.REMOVE REAR NO. 1 SEAT ASSEMBLY RH
72525A
2.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH
71843E
3.REMOVE REAR SEAT RECLINING COVER RH
71843F
4.REMOVE REAR SEAT RECLINING COVER RH
72615A
5.REMOVE REAR SEATBACK LOCK STRIKER COVER RH
72617
6.REMOVE SEATBACK LOCK STRIKER COVER RETAINER
72615A
7.REMOVE REAR SEATBACK LOCK STRIKER COVER RH
72617
8.REMOVE SEATBACK LOCK STRIKER COVER RETAINER
72665C
9.REMOVE REAR SEAT LOCK COVER RH
72665C
10.REMOVE REAR SEAT LOCK COVER RH
79105
11.REMOVE NO. 1 SEAT LEG SUB-ASSEMBLY RH
72650A
12.REMOVE REAR SEAT LOCK ASSEMBLY RH
72650A
13.REMOVE REAR SEAT LOCK ASSEMBLY RH
72201A
14.REMOVE SEAT TRACK HANDLE SUB-ASSEMBLY RH
72180
15.REMOVE REAR SEAT INNER TRACK ASSEMBLY RH
72160
16.REMOVE REAR SEAT OUTER TRACK ASSEMBLY RH
73380C
17.REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH
While sliding the part in the direction indicated by the arrow shown in the illustration, detach the J hook.
Pull out the No. 1 fold seat stopper band assembly from the rear end of the seat cushion cover with pad.
Pull out the fasteners as shown in the illustration.
|
Remove in this Direction | - | - |
|
Remove in this Direction |
Open the fasteners as shown in the illustration.
w/ Seat Belt Warnibg Syestem:
|
Remove in this Direction |
While opening the No. 1 seat cushion cover sub-assembly, pull out the rear No. 1 seat lock cable assembly and the rear No. 1 seat inner belt assembly RH from the slit as shown in the illustration.
Detach the clamp.
Remove the bolt.
w/o Seat Belt Warnibg Syestem:
|
Remove in this Direction |
While opening the No. 1 seat cushion cover sub-assembly LH, pull out the rear No. 1 seat lock cable assembly from the slit as shown in the illustration.
Remove the bolt.
|
Remove in this Direction |
Remove the rear No. 1 seat inner belt assembly RH from the hole of the rear seat cushion cover with pad RH as shown in the illustration.