Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 40 Side)
RM33K0E _58 Vehicle Interior _043554 SEAT BELT _0229924 REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 40 Side) A

SEAT BELT  REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 40 Side)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·
B394717

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.

·

Replace any other damaged parts as necessary.



PROCEDURE

Hide 73380C 1.INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

a.
B409152C01
0,0 0,0 false
V113147

Install in this Direction


Pass the rear No. 1 seat inner belt assembly RH through the hole of the rear seat cushion cover with pad RH as shown in the illustration.


b.

w/ Seat Belt Warnibg Syestem:

i.

Install the rear No. 1 seat inner belt assembly RH with the bolt.

B427421C01
5.083,1.26 5.292,0.208 5.292,0.208 5.604,0.208 true 5.656,0.115 5.969,0.313 0.313,0.198 10 false *a
*a Protruding Part - -


Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

The anchor part of the rear No. 1 seat inner belt assembly RH must not overlap the protruding part.



ii.

Attach the clamp.


iii.
B421270C01
0,0 0,0 false
V113147

Install in this Direction


While closing the back of the seat cushion cover with pad as shown in the illustration, pull out the rear seat lock assembly installation part of the rear No. 1 seat lock cable assembly and the rear No. 1 seat inner belt assembly RH from the slit.



c.

w/o Seat Belt Warnibg Syestem:

i.
B409123C02
1.333,1.083 0.948,0.885 true 0.781,0.76 1.094,0.917 0.313,0.156 10 true *a
*a Protruding Part


Install the rear No. 1 seat inner belt assembly RH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

The anchor part of the rear No. 1 seat inner belt assembly RH must not overlap the protruding part.



ii.
B411848C01
0,0 0,0 false
V113147

Install in this Direction


While closing the back of the seat cushion cover with pad as shown in the illustration, pull out the rear seat lock assembly installation part of the rear No. 1 seat lock cable assembly from the slit.



d.
B405083C01
0,0 0,0 false
V113147

Install in this Direction


Close the fasteners as shown in the illustration.


e.

Push in the closed fasteners as shown in the illustration.

B411849C01
0,0 0,0 false
V113147

Install in this Direction - -



f.
B405082

Roll up the No. 1 fold seat stopper band assembly toward the rear end of the seat cushion with pad and push it into the seat cushion with pad in the direction indicated by the arrow shown in the illustration.


g.
B404961

While sliding the part in the direction indicated by the arrow shown in the illustration, install the J hook.


Hide 72160 2.INSTALL REAR SEAT OUTER TRACK ASSEMBLY RH

Hide 72180 3.INSTALL REAR SEAT INNER TRACK ASSEMBLY RH

Hide 72201A 4.INSTALL SEAT TRACK HANDLE SUB-ASSEMBLY RH

Hide 72617 10.INSTALL SEATBACK LOCK STRIKER COVER RETAINER

Hide 72615A 11.INSTALL REAR SEATBACK LOCK STRIKER COVER RH

Hide 72617 12.INSTALL SEATBACK LOCK STRIKER COVER RETAINER

Hide 72615A 13.INSTALL REAR SEATBACK LOCK STRIKER COVER RH

Hide 72525A 16.INSTALL RECLINING ADJUSTER RELEASE HANDLE RH