Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 40 Side)
RM33K0E _58 Vehicle Interior _043554 SEAT BELT _0229924 REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 40 Side) G

SEAT BELT  REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 40 Side)  INSPECTION  


PROCEDURE

Hide 73380C 1.INSPECT REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

a.
B276073C05
1.573,1.781 1.833,1.25 true 2.052,1.208 2.375,1.76 true 0.042,0 0.292,0.25 0.25,0.25 10 false *a 2.281,1.781 2.896,1.979 0.615,0.198 10 false RBR+ 1.417,1.792 2.031,1.99 0.615,0.198 10 false RBR-
*a Component without harness connected
(Rear No. 1 Seat Inner Belt Assembly RH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (RBR+) - 2 (RBR-) Seat belt unfastened Below 1 Ω
1 (RBR+) - 2 (RBR-) Seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the rear No. 1 seat inner belt assembly RH.