Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Replace any other damaged parts as necessary.
1.REMOVE REAR NO. 1 SEAT ASSEMBLY LH
71844D
2.REMOVE REAR SEAT RECLINING COVER LH
72526E
3.REMOVE RECLINING ADJUSTER RELEASE HANDLE LH
72616A
4.REMOVE REAR SEATBACK LOCK STRIKER COVER LH
72618
5.REMOVE REAR SEATBACK LOCK STRIKER PROTECTOR
72616A
6.REMOVE REAR SEATBACK LOCK STRIKER COVER LH
72618
7.REMOVE REAR SEATBACK LOCK STRIKER PROTECTOR
72666B
8.REMOVE REAR SEAT LOCK COVER LH
72666B
9.REMOVE REAR SEAT LOCK COVER LH
79106
10.REMOVE NO. 1 SEAT LEG SUB-ASSEMBLY LH
72660F
11.REMOVE REAR SEAT LOCK ASSEMBLY LH
72660F
12.REMOVE REAR SEAT LOCK ASSEMBLY LH
72201B
13.REMOVE SEAT TRACK HANDLE SUB-ASSEMBLY LH
72190
14.REMOVE REAR SEAT INNER TRACK ASSEMBLY LH
72170
15.REMOVE REAR SEAT OUTER TRACK ASSEMBLY LH
73340C
16.REMOVE REAR CENTER SEAT LAP TYPE BELT ASSEMBLY LH
While sliding the part in the direction indicated by the arrow shown in the illustration, detach the J hook.
Pull out the No. 1 fold seat stopper band assembly from the rear end of the seat cushion cover with pad.
Pull out the fasteners as shown in the illustration.
|
Remove in this Direction | - | - |
|
Remove in this Direction |
Open the fasteners as shown in the illustration.
w/ Seat Belt Warning System:
|
Remove in this Direction |
While opening the No. 1 seat cushion cover sub-assembly LH, pull out the rear No. 1 seat lock cable assembly and rear center seat lap type belt assembly LH from the slit as shown in the illustration.
|
Remove in this Direction |
While opening the No. 1 seat cushion cover sub-assembly LH, pull out the rear No. 1 seat lock cable assembly and rear center seat lap type belt assembly LH from the slit as shown in the illustration.
Disconnect the connector.
|
Connector |
|
A |
|
Bolt | - | - |
Remove the bolt.
w/o Seat Belt Warning System:
|
Remove in this Direction |
While opening the No. 1 seat cushion cover sub-assembly LH, pull out the rear No. 1 seat lock cable assembly from the slit as shown in the illustration.
Remove the bolt.
|
Remove in this Direction |
Remove the rear center seat lap type belt assembly LH from the hole of the rear seat cushion cover with pad LH as shown in the illustration.
73330C
17.REMOVE REAR CENTER SEAT LAP TYPE BELT ASSEMBLY RH
w/ Seat Belt Warning System:
Detach the clamp.
| *a | Band |
|
Remove in this Direction |
Disconnect the rear center seat lap type belt assembly RH from the band as shown in the illustration.
|
Remove in this Direction |
Remove the bolt and the rear center seat lap type belt assembly RH from the hole of the rear seat cushion cover with pad LH as shown in the illustration.