Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 60 Side)
RM33K0E _58 Vehicle Interior _043554 SEAT BELT _0229925 REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 60 Side) G

SEAT BELT  REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 60 Side)  INSPECTION  


PROCEDURE

Hide 73330C 1.INSPECT REAR CENTER SEAT LAP TYPE BELT ASSEMBLY RH

a.
B276073C03
0.044,0.0 0.299,0.255 0.255,0.255 10 *a
*a Component without harness connected
(Rear Center Seat Lap Type Belt Assembly RH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Seat belt unfastened Below 1 Ω
3 - 4 Seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the rear center seat lap type belt assembly RH.


Hide 73340C 2.INSPECT REAR CENTER SEAT LAP TYPE BELT ASSEMBLY LH

a.

Measure the resistance according to the value(s) in the table below.

B421286C01
2.677,0.885 3.167,1.396 true 2.521,0.938 2.719,1.406 true 2.385,0.885 2.125,1.427 true 2.198,0.896 1.635,1.396 true 2.26,0.198 2.573,0.354 0.313,0.156 10 false *a 4.417,0.26 4.729,0.417 0.313,0.156 10 false *b 0.031,0.073 0.344,0.229 0.313,0.156 10 false *c 3.094,1.438 3.698,1.635 0.604,0.198 10 false LBR+ 2.615,1.438 3.229,1.635 0.615,0.198 10 false LBR- 1.958,1.448 2.573,1.646 0.615,0.198 10 false CBR+ 1.438,1.427 2.052,1.625 0.615,0.198 10 false CBR-
*a Connector A *b Connector B
*c Component without harness connected
(Rear Center Seat Lap Type Belt Assembly LH)
- -


Standard Resistance:
Tester Connection Condition Specified Condition
1(LBR+) - 2(LBR-) Seat belt unfastened Below 1 Ω
1(LBR+) - 2(LBR-) Seat belt fastened 10 kΩ or higher
3(CBR+) - B3 Always Below 1 Ω
4(CBR-) - B4 Always Below 1 Ω


If the result is not as specified, replace the rear center seat lap type belt assembly LH.