Wear protective gloves. Sharp areas on the parts may injure your hands.
There is risk of injury.
Replace any other damaged parts as necessary.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the RH side.
73580A
1.INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY
Use the same procedure as for the other side.
|
Install in this Direction |
Pass the rear No. 2 seat inner belt sub-assembly through the hole of the rear seat cushion cover with pad as shown in the illustration.
| *a | Protruding Part |
Install the rear No. 2 seat inner belt sub-assembly RH with the nut.
Do not allow the anchor part of the No. 2 seat inner belt sub-assembly to overlap the protruding part of the rear No. 2 seat adjuster.