Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT OUTER BELT ASSEMBLY
RM33K0E _58 Vehicle Interior _043554 SEAT BELT _0229927 REAR NO. 1 SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR NO. 1 SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73360C 1.INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY

a.
B409130C02
1.792,0.031 2.104,0.188 0.313,0.156 10 false *a 0.333,0.771 0.646,0.927 0.313,0.156 10 false *b 1.01,0.24 1.323,0.396 0.313,0.156 10 false *c
*a Unlocked
*b Locked
*c 45°


Before installing the rear No. 1 seat outer belt assembly, check the ELR.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the operation is not as specified, replace the rear No. 1 seat outer belt assembly.