Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › TRANSPONDER KEY AMPLIFIER
RM33K0E _58 Vehicle Interior _043548 THEFT DETERRENT / KEYLESS ENTRY _0230261 TRANSPONDER KEY AMPLIFIER A

THEFT DETERRENT / KEYLESS ENTRY  TRANSPONDER KEY AMPLIFIER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 89782 1.INSTALL TRANSPONDER KEY COIL

a.

Connect the connector.


b.
E339760C01
0,0 0,0 false
V113147

Install in this Direction


Align the claws of the transponder key coil with the upper bracket.


c.

Push in the transponder key coil and install it to the upper bracket.

NOTICE:

Do not push in the amplifier with excessive force as it may be damaged.



Hide 45286B 2.INSTALL STEERING COLUMN UPPER COVER

Hide 45287 3.INSTALL STEERING COLUMN LOWER COVER

Hide 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).