Home › General › SPECIFICATIONS › POWER ASSIST SYSTEMS
RM33K0E _V1 General _043608 SPECIFICATIONS _0203525 POWER ASSIST SYSTEMS F

SPECIFICATIONS  POWER ASSIST SYSTEMS  SERVICE DATA  


Power Steering Fluid
Power Steering Fluid Automatic transmission Fluid DEXRON II or III or equivalent
Maximum fluid level increase 5 mm (0.197 in.)
Fluid pressure at idle speed with valve closed (Maximum fluid pressure) for 1GR-FE 8800 to 9300 kPa (89.8 to 94.8 kgf/cm2 1276 to 1348 psi)
for GD Engine 9300 to 10000 kPa (94.9 to 101 kgf/cm2, 1349 to 1450 psi)
for KD Engine 8800 to 9300 kPa (89.8 to 94.8 kgf/cm2 1276 to 1348 psi)
for TR Engine 8800 to 9300 kPa (89.8 to 94.8 kgf/cm2 1276 to 1348 psi)
Fluid pressure at engine speeds of 1000 rpm and 3000 rpm (Standard fluid pressure difference) 490 kPa (4.99 kgf/cm2, 71 psi) or less
Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position (Maximum fluid pressure) for 1GR-FE 8800 to 9300 kPa (89.8 to 94.8 kgf/cm2 1276 to 1348 psi)
for GD Engine 9300 to 10000 kPa (94.9 to 101 kgf/cm2, 1349 to 1450 psi)
for KD Engine 8800 to 9300 kPa (89.8 to 94.8 kgf/cm2 1276 to 1348 psi)
for TR Engine 8800 to 9300 kPa (89.8 to 94.8 kgf/cm2, 1276 to 1348 psi)

Vane Pump
Vane pump shaft and vane pump housing oil maximum clearance 0.07 mm (0.00276 in.)
Vane pump rotor groove and vane pump plate maximum clearance 0.025 mm (0.000984 in.)
Compression spring free minimum length (Reference) (except 1GR-FE) 30.26 mm (1.19 in.)
Compression spring free minimum length (Reference) (for 1GR-FE) 31.95 mm (1.26 in.)
Vane pump rotating torque 0.27 N*m (3 kgf*cm, 2 in.*lbf) or less