Home › General › SPECIFICATIONS › 2TR-FE BATTERY / CHARGING
RM33K0E _V1 General _043608 SPECIFICATIONS _0203564 2TR-FE BATTERY / CHARGING F

SPECIFICATIONS  2TR-FE BATTERY / CHARGING  TORQUE SPECIFICATIONS  


Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Retainer plate x Generator drive end frame *1 2.3 23 20
Generator coil assembly x Generator drive end frame *1 5.6 57 50
Generator brush holder assembly x Generator coil assembly *1 1.8 18 16
Generator rear end cover x Generator coil assembly *1 4.6 47 41
Generator pulley with clutch x Generator rotor assembly *1 without SST 80 816 59
with SST 64 653 47
Generator pulley with clutch x Generator rotor assembly *2 80 816 59
Generator assembly x Cylinder block 43 438 32
Generator wire x Terminal B 9.8 100 87
Generator assembly x Generator bracket 13 133 10
Negative (-) battery terminal x No. 2 engine wire 7.6 77 67
Positive (+) cable x Positive (+) battery terminal 5.4 55 48
Negative (-) cable x Negative (-) battery terminal 5.4 55 48

*1: for 80 A Type and 100 A Type

*2: for 90 A Type