Home › General › SPECIFICATIONS › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS
RM33K0E _V1 General _043608 SPECIFICATIONS _0203520 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS F

SPECIFICATIONS  BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  TORQUE SPECIFICATIONS  


Brake Actuator (w/ VSC)
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Brake actuator assembly x Brake actuator bracket 5.4 55 48
Brake actuator assembly with bracket x Body 19.1 195 14
Brake actuator assembly x Brake tube (from master cylinder) without union nut wrench 19.5 199 14
with union nut wrench 17.2 175 13
Brake actuator assembly x Brake tube (to wheel cylinder) without union nut wrench 15.2 155 11
with union nut wrench 13.4 137 10

Brake Actuator (w/o VSC)
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Brake actuator assembly x Brake actuator bracket 5.4 55 48
Brake actuator assembly with bracket x Body 19.1 195 14
Brake actuator assembly x Brake tube without union nut wrench 15.2 155 11
with union nut wrench 13.4 137 10

Front Speed Sensor (for 4WD and Pre-Runner)
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Front speed sensor 8.5 87 75
Front speed sensor harness clamp 32 326 24
Skid control sensor clamp 13.5 138 10
Upper arm heat insulator x Front suspension tower 25.5 260 19

Rear Speed Sensor
Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Rear speed sensor 8.5 87 75
for 4WD and Pre-Runner:
Skid control sensor clamp RH
8.5 87 75
for 4WD and Pre-Runner:
Skid control sensor clamp LH
Bolt A 8.5 87 75
Bolt B 32 326 24

Deceleration Sensor (for 4WD and Pre-Runner without VSC)
Part Tightened N*m kgf*cm in.*lbf
Deceleration sensor x Body 8.0 82 71