75431A
1.REMOVE NO. 1 BACK DOOR EMBLEM
When removing the No. 1 back door emblem, heat the vehicle body and No. 1 back door emblem using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| No. 1 Back Door Emblem | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
| *a | Wooden Block |
| *b | Boss |
|
Protective Tape |
Put protective tape around the No. 1 back door emblem.
Insert piano wire between the vehicle body and No. 1 back door emblem.
Be careful of the boss positions.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the No. 1 back door emblem to the vehicle body.
Be careful not to damage the vehicle body.
Remove the No. 1 back door emblem.
75441B
2.REMOVE BACK DOOR NAME PLATE
When removing the back door name plate, heat the back door outside garnish sub-assembly and back door name plate using a heat light.
| Item | Temperature |
|---|---|
| Back Door Outside Garnish Sub-assembly | 40 to 60°C (104 to 140°F) |
| Back Door Name Plate | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
| *a | Wooden Block |
|
Protective Tape |
Put protective tape around the back door name plate.
Insert piano wire between the back door outside garnish sub-assembly and back door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the back door name plate to the back door outside garnish sub-assembly.
Be careful not to damage the back door outside garnish sub-assembly.
Remove the back door name plate.
75459A
3.REMOVE BACK DOOR MARK
When removing the back door mark, heat the vehicle body and back door mark using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Back Door Mark | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
| *a | Wooden Block |
|
Protective Tape |
Put protective tape around the back door mark.
Insert piano wire between the vehicle body and back door mark.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the back door mark to the vehicle body.
Be careful not to damage the vehicle body.
Remove the back door mark.
75428B
4.REMOVE FRONT NO. 2 DOOR NAME PLATE
When removing the front No. 2 door name plate, heat the vehicle body and front No. 2 door name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Front No. 2 Door Name Plate | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
| *a | Wooden Block |
|
Protective Tape |
Put protective tape around the front No. 2 door name plate.
Insert piano wire between the vehicle body and front No. 2 door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the front No. 2 door name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the front No. 2 door name plate.
75441E
5.REMOVE NO. 1 BACK DOOR NAME PLATE
When removing the No. 1 back door name plate, heat the vehicle body and No. 1 back door name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| No. 1 Back Door Name Plate | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
| *a | Wooden Block |
|
Protective Tape |
Put protective tape around the No. 1 back door name plate.
Insert piano wire between the vehicle body and No. 1 back door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the No. 1 back door name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the No. 1 back door name plate.
75441C
6.REMOVE NO. 2 BACK DOOR NAME PLATE
When removing the No. 2 back door name plate, heat the vehicle body and No. 2 back door name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| No. 2 Back Door Name Plate | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
| *a | Wooden Block |
|
Protective Tape |
Put protective tape around the No. 2 back door name plate.
Insert piano wire between the vehicle body and No. 2 back door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the No. 2 back door name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the No. 2 back door name plate.
75473B
7.REMOVE REAR NO. 3 BODY NAME PLATE
When removing the rear No. 3 body name plate, heat the vehicle body and rear No. 3 body name plate using a heat light.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Rear No. 3 Body Name Plate | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
| *a | Wooden Block |
|
Protective Tape |
Put protective tape around the rear No. 3 body name plate.
Insert piano wire between the vehicle body and rear No. 3 body name plate.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the rear No. 3 body name plate to the vehicle body.
Be careful not to damage the vehicle body.
Remove the rear No. 3 body name plate.