Home › Engine / Hybrid System › 2TR-FBE FUEL › FUEL SENDER GAUGE ASSEMBLY › from 2016.07
RM33K0E _51 Engine / Hybrid System _054514 2TR-FBE FUEL _0267768 FUEL SENDER GAUGE ASSEMBLY G

2TR-FBE FUEL  FUEL SENDER GAUGE ASSEMBLY  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

a.
A362933C01
0.25,1.552 0.531,1.552 true 0.365,3.135 0.646,3.135 true 0.052,0.042 0.281,0.24 0.229,0.198 10 false *a 0.083,1.479 0.344,1.688 0.26,0.208 10 false F 0.188,3.063 0.448,3.271 0.26,0.208 10 false E
*a Front view of wire harness connector
(to Fuel Sender Gauge Assembly)


Check that the float moves smoothly between F and E.


b.

Measure the resistance between terminals 1 and 2 of the connector according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 F 13.5 to 16.5 Ω
Between E and F 13.5 to 418.2 Ω (Gradually changes)
E 401.8 to 418.2 Ω


HINT:

If the value is not as specified, replace the fuel sender gauge assembly.