Home › Engine / Hybrid System › 2TR-FBE ENGINE CONTROL › POWER STEERING OIL PRESSURE SWITCH › from 2016.07
RM33K0E _51 Engine / Hybrid System _054512 2TR-FBE ENGINE CONTROL _0269981 POWER STEERING OIL PRESSURE SWITCH G

2TR-FBE ENGINE CONTROL  POWER STEERING OIL PRESSURE SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 89438 1.INSPECT POWER STEERING OIL PRESSURE SWITCH

a.

Check the power steering oil pressure switch.

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Powertrain / Engine and ECT / Data List / Power Steering Signal.

Powertrain > Engine and ECT > Data List
Tester Display
Power Steering Signal
50003 234 116

v.

Start the engine.


vi.

Read the value displayed on the tester.

OK:
Condition Specified Condition
Power steering operating ON
Power steering not operating OFF


If the result is not as specified, check the wire harness and connector. If the wire harness and connector are normal, replace the power steering oil pressure switch.