1.DISCHARGE FUEL SYSTEM PRESSURE
2. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
3.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
23271H
4.DISCONNECT NO. 1 FUEL HOSE
Disconnect the No. 1 fuel hose.
Click hereEngine / Hybrid System>2TR-FBE FUEL>FUEL SYSTEM>PRECAUTION
23300P
5.REMOVE FUEL FILTER ASSEMBLY
|
Pull |
|
Push |
Disconnect the fuel filter from the bracket, and then disconnect the fuel main tube and remove the fuel filter assembly.
Click hereEngine / Hybrid System>2TR-FBE FUEL>FUEL SYSTEM>PRECAUTION
23300P
6.INSTALL FUEL FILTER ASSEMBLY
| *a | Arrow |
Face the arrow on the fuel filter assembly upward and connect the fuel main tube to the lower pipe of the fuel filter assembly, and then connect the fuel filter assembly to the bracket.
23271H
7.CONNECT NO. 1 FUEL HOSE
Connect the No. 1 fuel hose.
Click hereEngine / Hybrid System>2TR-FBE FUEL>FUEL SYSTEM>PRECAUTION
Attach the No. 1 fuel hose to the fuel filter assembly.
8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
9.INSPECT FOR FUEL LEAK