Home › Engine / Hybrid System › 2TR-FBE STARTING › STARTER › from 2016.07
RM33K0E _51 Engine / Hybrid System _054519 2TR-FBE STARTING _0272845 STARTER A

2TR-FBE STARTING  STARTER  DISASSEMBLY  


PROCEDURE

Hide 28150 1.REMOVE MAGNET STARTER SWITCH ASSEMBLY

a.
A336818

Remove the nut and disconnect the lead wire from terminal C.


b.
A336819

Remove the 2 nuts from the repair service starter kit while holding the magnet starter switch assembly.


c.
A341229

Pull the magnet starter switch assembly and, while lifting the front part of the magnet starter switch assembly, release the plunger hook from the starter pinion drive lever and remove the magnet starter switch assembly.


Hide 28120 2.REMOVE STARTER YOKE ASSEMBLY

a.
A336821

Using a T25 "TORX" socket wrench, remove the 2 bolts.


b.
A336822

Remove the starter yoke assembly and starter commutator end frame assembly from the repair service starter kit.


c.
A336823

Remove the starter armature plate from the starter yoke assembly or repair service starter kit.


d.
A336824

Remove the 3 planetary gears from the repair service starter kit.


e.
A360244

Remove the rubber seal from the repair service starter kit.


Hide 28140 3.REMOVE STARTER BRUSH HOLDER ASSEMBLY

a.
A224838

Remove the 2 screws from the starter commutator end frame assembly.


b.
A377034

Remove the starter commutator end frame assembly from the starter yoke assembly.

NOTICE:

While holding down the lead wire, remove the starter commutator end frame assembly.



c.
A368709

Remove the starter brush holder assembly from the starter armature assembly.


Hide 28160 4.REMOVE STARTER ARMATURE ASSEMBLY

a.
A202438

Remove the starter armature assembly from the starter yoke assembly.