Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › from 2016.07
RM33K0E _51 Engine / Hybrid System _043525 CRUISE CONTROL _0219580 CRUISE CONTROL SYSTEM U

CRUISE CONTROL  CRUISE CONTROL SYSTEM  TERMINALS OF ECU  


CHECK ECM (for 1GR-FE)


A225776E26
0.5,0.333 0.906,0.583 0.406,0.25 1.51,0.333 1.917,0.583 0.406,0.25 3.083,0.333 3.49,0.583 0.406,0.25 4.094,0.333 4.5,0.583 0.406,0.25 5.167,0.333 5.573,0.583 0.406,0.25 6.177,0.333 6.583,0.583 0.406,0.25 0.552,0.385 0.938,0.604 0.385,0.219 10 false G158 1.563,0.385 1.948,0.604 0.385,0.219 10 false G159 3.135,0.385 3.75,0.583 0.615,0.198 10 false C120 4.156,0.385 4.771,0.583 0.615,0.198 10 false C119 5.219,0.385 5.833,0.583 0.615,0.198 10 false C118 6.229,0.385 6.844,0.583 0.615,0.198 10 false C117

HINT:

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C118-12 (E1) - Body ground BR - Body ground Ground Always Below 1 Ω
C120-22 (D) - C118-12 (E1) GR - BR D shift position switch signal Ignition switch ON and shift lever in D, S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in D, S, "+" or "-" Below 1 V
G158-24 (BATT) - C118-12 (E1) Y - BR Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
G159-9 (SFTD) - C118-12 (E1) G - BR Down-shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "-" (down-shift) Below 1 V
Ignition switch ON and "-" shift paddle operated (down-shift) Below 1 V
G159-15 (SFTU) - C118-12 (E1) W - BR Up-shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "+" (up-shift) Below 1 V
Ignition switch ON and "+" shift paddle operated (up-shift) Below 1 V
G159-22 (S) - C118-12 (E1) L - BR S shift position switch signal Ignition switch ON and shift lever in S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in S, "+" or "-" Below 1 V
G159-1 (CCS) - C118-12 (E1) G - BR Cruise control main switch circuit Cruise control main switch off 1 MΩ or higher
Cruise control main switch on Below 2.5 Ω
+RES switch on 235 to 245 Ω
-SET switch on 617 to 643 Ω
CANCEL switch on 1509 to 1571 Ω
G159-34 (ST1-) - C118-12 (E1) GR - BR Stop light switch assembly signal (opposite of voltage at STP terminal) Ignition switch ON,
brake pedal depressed
Below 1.5 V
Ignition switch ON,
brake pedal released
7.5 to 14 V
G159-35 (STP) - C118-12 (E1) L - BR Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released Below 1.5 V


CHECK ECM (for 2TR-FE and 2TR-FBE)


C350257E01
0.667,0.583 1,0.833 0.333,0.25 2.083,0.583 2.417,0.833 0.333,0.25 3.5,0.583 3.833,0.833 0.333,0.25 4.833,0.583 5.167,0.833 0.333,0.25 6.083,0.583 6.417,0.833 0.333,0.25 0.719,0.635 1.177,0.833 0.458,0.198 10 false C14 2.125,0.635 2.583,0.833 0.458,0.198 10 false C15 3.552,0.635 4.01,0.833 0.458,0.198 10 false C16 4.875,0.635 5.333,0.833 0.458,0.198 10 false G56 6.135,0.635 6.594,0.833 0.458,0.198 10 false G57

HINT:

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C14-3 (E1) - Body ground W-B - Body ground Ground Always Below 1 Ω
C16-17 (SFTU) - C14-3 (E1) W - W-B Up-shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "+" position (up-shift) Below 1 V
Ignition switch ON and "+" shift paddle operated (up-shift)* Below 1 V
C16-27 (SFTD) - C14-3 (E1) G - W-B Down-shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "-" (down-shift) Below 1 V
Ignition switch ON and "-" shift paddle operated (down-shift)* Below 1 V
C16-30 (S) - C14-3 (E1) L - W-B S shift position switch signal Ignition switch ON and shift lever in S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in S, "+" or "-" Below 1 V
G56-18 (D) - C14-3 (E1) P - W-B Clutch switch signal Ignition switch ON, clutch pedal depressed Below 1 V
Ignition switch ON, clutch pedal released 11 to 14 V
G56-22 (CCS) - G56-21 (ECCS) G - BR Cruise control main switch circuit Cruise control main switch off 1 MΩ or higher
Cruise control main switch on Below 2.5 Ω
+RES switch on 235 to 245 Ω
-SET switch on 617 to 643 Ω
CANCEL switch on 1509 to 1571 Ω
G57-3 (BATT) - C14-3 (E1) Y - W-B Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
G57-10 (STP) - C14-3 (E1) L - W-B Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released Below 1.5 V
G57-11 (ST1-) - C14-3 (E1) GR - W-B Stop light switch assembly signal
(opposite to voltage at STP terminal)
Ignition switch ON,
brake pedal depressed
Below 1.5 V
Ignition switch ON,
brake pedal released
7.5 to 14 V

*: w/ Transmission Shift Switch Assembly



CHECK ECM (for 1GD-FTV)


A340466E19
0.583,0.417 0.917,0.667 0.333,0.25 1.75,0.417 2.083,0.667 0.333,0.25 2.917,0.417 3.25,0.667 0.333,0.25 3.917,0.417 4.25,0.667 0.333,0.25 5,0.417 5.333,0.667 0.333,0.25 6.167,0.417 6.5,0.667 0.333,0.25 0.635,0.469 0.958,0.719 0.323,0.25 10 false C38 1.802,0.469 2.073,0.677 0.271,0.208 10 false C39 2.969,0.469 3.281,0.667 0.313,0.198 10 false C40 3.969,0.469 4.281,0.667 0.313,0.198 10 false C41 5.042,0.469 5.354,0.667 0.313,0.198 10 false G49 6.208,0.469 6.521,0.667 0.313,0.198 10 false G50

HINT:

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C38-14 (D) - C41-1 (E1)*1 GR - W-B Clutch switch signal Ignition switch ON, clutch pedal depressed Below 1 V
Ignition switch ON, clutch pedal released 11 to 14 V
C38-14 (D) - C41-1 (E1)*2 GR - W-B D shift position signal Ignition switch ON, shift lever in D 11 to 14 V
Ignition switch ON, shift lever is not in D Below 1 V
C41-1 (E1) - Body ground W-B - Body ground Ground Always Below 1 Ω
G49-13 (S) - C41-1 (E1) L - W-B S shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON, shift lever is not in S Below 1 V
G49-20 (SFTD) - C41-1 (E1)*2 G - W-B Down-shift switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "-" position (down-shift) Below 1 V
Ignition switch ON and "-" shift paddle operated and held (down-shift)*3 Below 1 V
G49-21 (SFTU) - C41-1 (E1)*2 W - W-B Up-shift switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "+" position (up-shift) Below 1 V
Ignition switch ON and "+" shift paddle operated and held (up-shift)*3 Below 1 V
G50-1 (BATT) - C41-1 (E1) Y - W-B Constant power source Always 11 to 14 V
G50-12 (ST1-) - C41-1 (E1) GR - W-B Stop light signal Ignition switch ON, brake pedal depressed 0 to 1.5 V
Ignition switch ON, brake pedal released 7.5 to 14 V
G50-13 (STP) - C41-1 (E1) L - W-B Stop light signal Brake pedal depressed 7.5 to 14 V
Brake pedal released 0 to 1.5 V
G50-26 (CCS) - C41-1 (E1) G - W-B Cruise control main switch circuit Cruise control main switch off 1 MΩ or higher
Cruise control main switch on Below 2.5 Ω
+RES switch on 235 to 245 Ω
-SET switch on 617 to 643 Ω
CANCEL switch on 1509 to 1571 Ω

*1: for Manual Transmission

*2: for Automatic Transmission

*3: w/ Transmission Shift Switch



CHECK ECM (for 1KD-FTV)


A254878E10
1.208,0.406 1.615,0.646 0.406,0.24 2.729,0.406 3.135,0.646 0.406,0.24 4.292,0.406 4.698,0.646 0.406,0.24 5.76,0.406 6.167,0.646 0.406,0.24 1.281,0.448 1.594,0.625 0.313,0.177 10 false C73 2.802,0.448 3.115,0.625 0.313,0.177 10 false C74 4.333,0.448 4.719,0.625 0.385,0.177 10 false G129 5.802,0.448 6.167,0.625 0.365,0.177 10 false G130

HINT:

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C74-7 (E1) - Body ground W-B - Body ground Ground Always Below 1 Ω
G129-2 (BATT) - C74-7 (E1) Y - W-B Battery (for measuring the battery voltage and for the ECM memory) Always 11 to 14 V
G129-14 (ST1-) - C74-7 (E1) GR - W-B Stop light switch assembly signal
(opposite to voltage at STP terminal)
Ignition switch ON,
brake pedal depressed
0 to 1.5 V
Ignition switch ON,
brake pedal released
7.5 to 14 V
G129-15 (STP) - C74-7 (E1) L - W-B Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released 0 to 1.5 V
G130-21 (CCS) - C71-7 (E1) G - W-B Cruise control main switch circuit Cruise control main switch off 1 MΩ or higher
Cruise control main switch on Below 2.5 Ω
+RES switch on 235 to 245 Ω
-SET switch on 617 to 643 Ω
CANCEL switch on 1509 to 1571 Ω


CHECK TCM (for 1KD-FTV)


C214981E14
1.479,0.208 1.854,0.427 0.375,0.219 3.49,0.208 3.865,0.427 0.375,0.219 5.458,0.208 5.833,0.427 0.375,0.219 1.542,0.25 1.854,0.427 0.313,0.177 10 false C75 3.521,0.25 4.052,0.427 0.531,0.177 10 false G131 5.479,0.25 5.865,0.427 0.385,0.177 10 false G132

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G131-8 (D) - C75-1 (E1) P - W-B D shift position switch signal Ignition switch ON and shift lever in D, S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in S, "+" or "-" Below 1 V
C75-1 (E1) - Body ground W-B - Body ground Ground Always Below 1 Ω
G132-15 (S) - C75-1 (E1) L - W-B S shift position switch signal Ignition switch ON and shift lever in S, "+" or "-" 11 to 14 V
Ignition switch ON and shift lever not in S, "+" or "-" Below 1 V
G132-22 (SFTU) - C75-1 (E1) W - W-B Up-shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "+" position (up-shift) Below 1 V
Ignition switch ON and "+" shift paddle operated and held (up-shift)* Below 1 V
G132-23 (SFTD) - C75-1 (E1) G - W-B Down-shift position switch signal Ignition switch ON and shift lever in S 11 to 14 V
Ignition switch ON and shift lever in "-" (down-shift) Below 1 V
Ignition switch ON and "-" shift paddle operated and held (down-shift)* Below 1 V

*: w/ Transmission Shift Switch Assembly