1.INSTALL MANUAL VALVE
Coat the manual valve with ATF and install it to the transmission valve body assembly.
35145C
2.INSTALL TRANSMISSION CASE GASKET
Coat 2 new transmission case gaskets with ATF, and install them to the automatic transmission case sub-assembly.
35410
3.INSTALL TRANSMISSION VALVE BODY ASSEMBLY
| *1 | Manual Valve Lever Sub-assembly |
| *2 | Manual Valve |
Insert the manual valve lever sub-assembly into the groove on the end of the manual valve and install the transmission valve body assembly to the automatic transmission case sub-assembly with the 12 bolts.
| Item | Length |
|---|---|
| Bolt A | 25 mm (0.984 in.) |
| Bolt B | 36 mm (1.42 in.) |
| Bolt C | 50 mm (1.97 in.) |
Install the detent spring and detent spring cover to the transmission valve body assembly with the bolt.
35330
4.INSTALL VALVE BODY OIL STRAINER ASSEMBLY
Coat a new O-ring with ATF, and install it to the valve body oil strainer assembly.
Install the valve body oil strainer assembly to the transmission valve body assembly with the 3 bolts.
82125J
5.CONNECT TRANSMISSION WIRE
6. RESET MEMORY
Perform Reset Memory (AT initialization) when replacing the transmission valve body assembly or any of the shift solenoid valves.
for 2TR-FE:
for 2TR-FBE: