Home › General › SPECIFICATIONS › 2TR-FBE STARTING › from 2016.07
RM33K0E _V1 General _043608 SPECIFICATIONS _0265075 2TR-FBE STARTING F

SPECIFICATIONS  2TR-FBE STARTING  SERVICE DATA  


STARTER
Starter assembly No-load characteristics current Standard current 90 A or less at 11.5 V
Magnet starter switch assembly Terminal 50 - Terminal C Standard resistance Below 1 Ω
Terminal 50 - Switch body Standard resistance Below 2 Ω
Starter brush holder assembly A - B
C - D
D - E
Standard resistance Below 1 Ω
Brush length Standard length 10.4 mm (0.409 in.)
Minimum length 5.0 mm (0.197 in.)
Starter armature assembly Segments Standard resistance Below 1 Ω
Segment - Coil core Standard resistance 10 kΩ or higher
Commutator circle runout Maximum runout 0.05 mm (0.00197 in.)
Commutator diameter Standard diameter 29.0 mm (1.14 in.)
Minimum diameter 28.0 mm (1.10 in.)
Commutator undercut depth Standard undercut depth 0.7 mm (0.0276 in.)
Minimum undercut depth 0.2 mm (0.00787 in.)

IGNITION SWITCH
Tester connection Condition Specified condition
- Lock 10 kΩ or higher
7 (ACC) - 5 (AM1) ACC Below 1 Ω
8 (IG1) - 5 (AM1)
7 (ACC) - 5 (AM1)
4 (AM2) - 3 (IG2)
ON Below 1 Ω
8 (IG1) - 5 (AM1)
6 (ST1) - 5 (AM1)
4 (AM2) - 3 (IG2)
4 (AM2) - 2 (ST2)
START Below 1 Ω

RELAY
Item Tester connection Condition Specified condition
Starter relay (ST NO. 1) 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω