GENERAL
This system has a rear television camera assembly mounted on the tail gate to assist the driver in parking the vehicle by displaying an image of the area behind the vehicle. The system displays the image on the navigation receiver assembly.
This system consists of the following components:
*1: for Automatic Transmission
*2: for Manual Transmission
Navigation receiver assembly
Rear television camera assembly
Park/neutral position switch assembly*1
Back-up light switch assembly*2
FUNCTION OF COMPONENTS
The radio and display receiver assembly controls the system by using information from the following components:
| Components | Function |
|---|---|
|
*1: for Automatic Transmission *2: for Manual Transmission |
|
| Rear television camera assembly | ·
Mounted on the tail gate to transmit an image of the area behind the vehicle to the radio and display receiver assembly. ·
Has a color video camera that uses a Complementary Metal Oxide Semiconductor (CMOS) and wide-angle lens. |
| Radio and display receiver assembly | ·
Receives the video signals which contain an image of the area behind the vehicle taken with the rear television camera assembly. ·
Performs control of the system by receiving a shift position signal from the park/neutral position switch assembly*1 or back-up light switch assembly*2. ·
Displays the rear view monitor image on the display panel. |
·
Park/neutral position switch assembly*1 ·
Back-up light switch assembly*2 |
Transmits a reverse signal to the radio and display receiver assembly. |
OPERATION EXPLANATION
The park/neutral position switch assembly*1 or back-up light switch assembly*2 outputs the R position signal to the navigation receiver assembly when the shift lever is moved to R. After receiving the R position signal, the navigation receiver assembly switches to the rear view monitor system.
*1: for Automatic Transmission
*2: for Manual Transmission