Home › Engine / Hybrid System › 1GD-FTV ENGINE CONTROL › ECD SYSTEM(for i-ART) › from 2016.10
RM33K0E _51 Engine / Hybrid System _043518 1GD-FTV ENGINE CONTROL _0245023 ECD SYSTEM(for i-ART) U

1GD-FTV ENGINE CONTROL  ECD SYSTEM(for i-ART)  TERMINALS OF ECM  


A340466E18
0.531,0.438 0.969,0.677 0.438,0.24 1.74,0.438 2.177,0.677 0.438,0.24 2.844,0.438 3.281,0.677 0.438,0.24 3.885,0.438 4.323,0.677 0.438,0.24 5,0.438 5.438,0.677 0.438,0.24 6.156,0.438 6.594,0.677 0.438,0.24 1.844,0.469 2.271,0.708 0.427,0.24 10 false C39 0.635,0.469 1.042,0.708 0.406,0.24 10 false C38 2.938,0.469 3.385,0.698 0.448,0.229 10 false C40 3.99,0.469 4.375,0.698 0.385,0.229 10 false C41 5.083,0.469 5.51,0.688 0.427,0.219 10 false G49 6.25,0.469 6.708,0.719 0.458,0.25 10 false G50

HINT:

Each ECM terminal's standard voltage is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G50-1 (BATT) - C41-1 (E1) Y - W-B Battery (for measuring the battery voltage and for the ECM memory) Always 11 to 14 V
G50-18 (IGSW) - C41-1 (E1) GR - W-B Engine switch Engine switch on (IG) 11 to 14 V
G50-2 (+B) - C41-1 (E1) L - W-B Power source of ECM Engine switch on (IG) 11 to 14 V
G50-3 (+B2) - C41-1 (E1) B - W-B Power source of ECM Engine switch on (IG) 11 to 14 V
G50-4 (+B3) - C41-1 (E1) B - W-B Power source of ECM Engine switch on (IG) 11 to 14 V
G49-14 (MREL) - C41-1 (E1) W - W-B EFI-MAIN NO. 1 relay operation signal Engine switch on (IG) 11 to 14 V
10 seconds elapsed after engine switch off 0 to 1.5 V
C40-5 (+BD1) - C41-1 (E1) B - W-B EDU relay operation signal Engine switch on (IG) 11 to 14 V
C40-4 (+BD2) - C41-1 (E1) B - W-B EDU relay operation signal Engine switch on (IG) 11 to 14 V
G49-15 (GREL) - C41-1 (E1) LG - W-B GLOW relay Cranking 11 to 14 V
Idling (10 seconds or more after engine start) 0 to 1.5 V
G49-11 (NSW) - C41-1 (E1) L - W-B Park/Neutral position switch assembly signal Engine switch on (IG), shift lever not in P or N 11 to 14 V
Engine switch on (IG), shift lever in P or N Below 1.0 V
G50-29 (VCPA) - G50-22 (EPA) LG - G Power source of accelerator pedal position sensor (for VPA) Engine switch on (IG) 4.5 to 5.5 V
G50-30 (VCP2) - G50-25 (EPA2) R - Y Power source of accelerator pedal position sensor (for VPA2) Engine switch on (IG) 4.5 to 5.5 V
G50-28 (VPA) - G50-22 (EPA) W - G Accelerator pedal position sensor signal (for engine control) Engine switch on (IG), accelerator pedal fully released 0.5 to 1.1 V
Accelerator pedal position sensor signal (for engine control) Engine switch on (IG), accelerator pedal fully depressed 3.0 to 4.6 V
G50-31 (VPA2) - G50-25 (EPA2) GR - Y Accelerator pedal position sensor signal (for sensor malfunction detection) Engine switch on (IG), accelerator pedal fully released 0.9 to 2.3 V
Accelerator pedal position sensor signal (for sensor malfunction detection) Engine switch on (IG), accelerator pedal fully depressed 3.4 to 5.0 V
C39-25 (VCVG) - C39-24 (EVG) L - Y Power source of mass air flow meter sub-assembly (for VG) Engine switch on (IG) 4.8 to 5.2 V
C39-33 (VG) - C39-24 (EVG) W - Y Mass air flow meter sub-assembly signal Idling Pulse generation
(See waveform 1)
C39-32 (THA) - C39-24 (EVG) B - Y Intake air temperature sensor (built into mass air flow meter sub-assembly) Idling, intake air temperature at 20°C (68°F) 0.5 to 3.4 V
C39-35 (THIA) - C39-27 (ETHI) G - BR Intake air temperature sensor (turbo) Idling, intake air temperature at 0 to 80°C (32 to 176°F) 0.5 to 3.4 V
C38-34 (THW) - C38-27 (ETHW) B - BR Engine coolant temperature sensor Idling, engine coolant temperature at 80°C (176°F) 0.2 to 1.0 V
G49-22 (STA) - C41-1 (E1) GR - W-B Starter signal Cranking 6.0 V or higher
C38-6 (#1D+) - C38-7 (#1D-) W - B No. 1 Injector assembly signal Idling Pulse generation
(See waveform 2)
C38-1 (#2D+) - C38-2 (#2D-) R - W No. 2 Injector assembly signal
C39-7 (#3D+) - C39-6 (#3D-) G - R No. 3 Injector assembly signal
C38-5 (#4D+) - C38-4 (#4D-) Y - L No. 4 Injector assembly signal
C41-17 (VCG) - C41-18 (G2-) B - W Power source of camshaft position sensor (specific voltage) Engine switch on (IG) 4.5 to 5.5 V
C41-27 (G2+) - C41-18 (G2-) R - W Camshaft position sensor signal Idling Pulse generation
(See waveform 3)
C41-20 (VCNE) - C41-19 (NE-) W - R Power source of crankshaft position sensor (specific voltage) Engine switch on (IG) 4.5 to 5.5 V
C41-28 (NE+) - C41-19 (NE-) Y - R Crankshaft position sensor signal Idling Pulse generation
(See waveform 4)
G50-13 (STP) - C41-1 (E1) L - W-B Stop light switch assembly signal Engine switch on (IG), brake pedal depressed 7.5 to 14 V
Engine switch on (IG), brake pedal released 0 to 1.5 V
G50-12 (ST1-) - C41-1 (E1) GR - W-B Stop light switch assembly signal
(opposite to STP)
Engine switch on (IG), brake pedal depressed 0 to 1.5 V
Engine switch on (IG), brake pedal released 7.5 to 14 V
G49-25 (TC) - C41-1 (E1) R - W-B Terminal TC of DLC3 Engine switch on (IG) 11 to 14 V
G49-10 (SPD) - C41-1 (E1) V - W-B Speed signal from combination meter assembly Engine switch on (IG), slowly wheel rotated Pulse generation
(See waveform 5)
C38-28 (VCPM) - C38-19 (EPIM) R - BR Power source of manifold absolute pressure sensor (specific voltage) Engine switch on (IG) 4.5 to 5.5 V
C38-18 (PIM) - C38-19 (EPIM) L - BR Manifold absolute pressure sensor Negative pressure of 40 kPa (300 mmHg, 11.8 in.Hg) applied 0.1 to 0.7 V
Same as atmospheric pressure 0.8 to 1.5 V
Positive pressure of 170 kPa (1275 mmHg, 50.2 in.Hg) applied 1.6 to 2.3 V
G49-16 (TACH) - C41-1 (E1) V - W-B Engine speed Idling Pulse generation
(See waveform 6)
C40-28 (VIJ1) - C40-19 (EIJ1) B - W Power source of fuel pressure sensor (No. 1 injector assembly) Engine switch on (IG) 4.5 to 5.5 V
C40-18 (PIJ1) - C40-19 (EIJ1) R - W Fuel pressure sensor (No. 1 injector assembly) Engine warmed up, engine idling 1.4 to 1.7 V
C41-24 (VIJ2) - C41-30 (EIJ2) B - W Power source of fuel pressure sensor (No. 2 injector assembly) Engine switch on (IG) 4.5 to 5.5 V
C41-29 (PIJ2) - C41-30 (EIJ2) R - W Fuel pressure sensor (No. 2 injector assembly) Engine warmed up, engine idling 1.4 to 1.7 V
C41-33 (VIJ3) - C41-25 (EIJ3) L - Y Power source of fuel pressure sensor (No. 3 injector assembly) Engine switch on (IG) 4.5 to 5.5 V
C41-26 (PIJ3) - C41-25 (EIJ3) G - Y Fuel pressure sensor (No. 3 injector assembly) Engine warmed up, engine idling 1.4 to 1.7 V
C41-22 (VIJ4) - C41-21 (EIJ4) L - Y Power source of fuel pressure sensor (No. 4 injector assembly) Engine switch on (IG) 4.5 to 5.5 V
C41-23 (PIJ4) - C41-21 (EIJ4) G - Y Fuel pressure sensor (No. 4 injector assembly) Engine warmed up, engine idling 1.4 to 1.7 V
C39-3 (PCV+) - C39-4 (PCV-) G - R Pre-stroke control valve operation signal Idling Pulse generation
(See waveform 7)
C39-2 (PRV+) - C39-1 (PRV-) B - Y Pressure discharge valve signal Engine switch turned off after idling Pulse generation
C40-1 (VNM+) - C41-1 (E1) G - W-B DC motor signal (turbocharger nozzle vane control actuator) Idling Pulse generation
C40-2 (VNM-) - C41-1 (E1) W - W-B DC motor signal (turbocharger nozzle vane control actuator) Idling Pulse generation
C40-30 (VNVC) - C40-22 (VNE2) R - W Power source of nozzle vane position sensor (turbocharger nozzle vane control actuator) Engine switch on (IG) 4.5 to 5.5 V
C40-23 (VNA) - C40-22 (VNE2) P - W Nozzle vane position sensor signal (turbocharger nozzle vane control actuator) Engine switch on (IG) 2.3 to 2.7 V
C40-29 (VCVL) - C40-20 (EVLU) Y - L Power source of throttle position sensor Engine switch on (IG) 4.5 to 5.5 V
C40-21 (VLU) - C40-20 (EVLU) W- L Throttle position sensor signal Engine switch on (IG), throttle valve
fully opened
3.6 to 4.2 V
Engine switch on (IG), throttle valve
fully closed
0.4 to 1.0 V
C41-6 (M+) - C41-3 (ME01) G - W-B Diesel throttle duty signal Engine warmed up, racing engine Pulse generation
C41-5 (M-) - C41-3 (ME01) R - W-B Diesel throttle duty signal Engine warmed up, racing engine Pulse generation
C40-31 (VCEG) - C40-24 (EEGL) R - W Power source of EGR valve position sensor Engine switch on (IG) 4.5 to 5.5 V
C40-25 (EGLS) - C40-24 (EEGL) G - W EGR valve position sensor Engine switch on (IG) 0.6 to 1.4 V
C40-6 (EGM+) - C41-1 (E1) B - W-B EGR valve duty signal Engine warmed up, idling Pulse generation
C40-7 (EGM-) - C41-1 (E1) W - W-B EGR valve duty signal Engine warmed up, idling Pulse generation
C38-16 (ECBV) - C41-1 (E1) L - W-B Vacuum switching valve assembly (for EGR bypass valve) Vacuum switching valve assembly (for EGR bypass valve) on 0 to 1.5 V
Vacuum switching valve assembly (for EGR bypass valve) off 11 to 14 V
C38-10 (SCV) - C41-1 (E1) G - W-B Vacuum switching valve
(for swirl control valve)
Idling 0 to 1.5 V
Engine speed 2600 rpm or more 11 to 14 V
C38-23 (THTO) - C38-22 (ETTO) G - W Exhaust gas temperature sensor Engine warmed up, idling 0.2 to 4.95 V
C38-33 (THCO) - C38-26 (ETCO) B - R No. 2 exhaust gas temperature sensor Engine warmed up, idling 0.2 to 4.95 V
G49-23 (NEO) - C41-1 (E1) G - W-B Crankshaft position sensor signal sent to certification ECU (smart key ECU assembly) Engine warmed up, idling Pulse generation
(See waveform 8)
G50-15 (AC1) - C40-3 (E01) GR - W-B A/C signal A/C switch on 0 to 1.5 V
A/C switch off 11 to 14 V
G50-14 (ACT) - C40-3 (E01) LG - W-B A/C signal Engine switch on (IG) 11 to 14 V
A/C cut control on 0 to 3 V
G49-28 (CANL) - C41-1 (E1) W - W-B CAN communication line Engine switch on (IG) Pulse generation
(See waveform 9)
G49-17 (CANH) - C41-1 (E1) B - W-B CAN communication line Engine switch on (IG) Pulse generation
(See waveform 10)
C41-7 (LIN) - C41-1 (E1) P - W-B LIN communication line Engine switch on (IG) Pulse generation
(See waveform 11)
C41-16 (CINJ) - C41-1 (E1) G - W-B INJ communication line Engine warmed up, idling Pulse generation
(See waveform 12)
C40-3 (E01) - Body ground W-B - Body ground Ground circuit of ECM Always Below 1 Ω
C41-4 (E02) - Body ground W-B - Body ground Ground circuit of ECM Always Below 1 Ω
C41-1 (E1) - Body ground W-B - Body ground Ground circuit of ECM Always Below 1 Ω
C41-3 (ME01) - Body ground W-B - Body ground Ground circuit of ECM Always Below 1 Ω
G50-8 (EC) - Body ground BR - Body ground Ground circuit of ECM Always Below 1 Ω
C38-3 (E1D1) - Body ground W-B - Body ground Ground circuit of ECM Always Below 1 Ω
C39-5 (E1D2) - Body ground W-B - Body ground Ground circuit of ECM Always Below 1 Ω
C41-2 (E04) - Body ground W-B - Body ground Ground circuit of ECM Always Below 1 Ω

WAVEFORM 1


A337204E04
0.156,1.417 0.615,1.615 0.458,0.198 10 false GND 1.333,1.969 2.583,2.156 1.25,0.188 10 false 100 μsec./DIV. 2.76,0.073 3.406,0.333 0.646,0.26 10 false 1 V/DIV.

Mass Air Flow Meter Sub-assembly Signal
ECM Terminal Name Between VG and EVG
Tester Range 1 V/DIV., 100 μsec./DIV.
Condition Engine switch on (IG)


WAVEFORM 2


A346498E01
1.094,1.917 1.958,2.115 0.865,0.198 10 false 1 msec./DIV. 2.781,0.146 3.396,0.344 0.615,0.198 10 false 10 V/DIV. 2.969,1.188 3.344,1.385 0.375,0.198 10 false GND

No. 1 (to No. 4) Injector Assembly Signal
ECM Terminal Name Between #1D+ and #1D-
Between #2D+ and #2D-
Between #3D+ and #3D-
Between #4D+ and #4D-
Tester Range 10 V/DIV., 1 msec./DIV.
Condition Idling with warm engine

HINT:

The waveform varies depending on the injector injection.



WAVEFORM 3


A340470E01
2.854,0.156 3.406,0.344 0.552,0.188 10 false 5 V/DIV. 3.042,1.427 3.406,1.646 0.365,0.219 10 false GND 1.094,1.854 2.052,2.031 0.958,0.177 10 false 20 msec./DIV.

Camshaft Position Sensor Signal
ECM Terminal Name Between G2+ and G2-
Tester Range 5 V/DIV., 20 msec./DIV.
Condition Idling with warm engine

HINT:

The waveform varies depending on the engine speed.



WAVEFORM 4


A340468E01
2.833,0.135 3.396,0.354 0.563,0.219 10 false 2 V/DIV. 1.24,1.833 2.229,2.042 0.99,0.208 10 false 10 msec./DIV. 3.073,1.375 3.417,1.635 0.344,0.26 10 false GND

Crankshaft Position Sensor Signal
ECM Terminal Name Between NE+ and NE-
Tester Range 2 V/DIV., 10 msec./DIV.
Condition Idling with warm engine

HINT:

The wavelength becomes shorter as the engine speed.



WAVEFORM 5


A303294E02
2.75,0.125 3.365,0.333 0.615,0.208 10 false 5 V/DIV. 2.927,1.115 3.302,1.333 0.375,0.219 10 false GND 1.521,1.885 2.521,2.125 1,0.24 10 false 10 msec./DIV.

Vehicle Speed Signal
ECM Terminal Name Between SPD and E1
Tester Range 5 V/DIV., 10 msec./DIV.
Condition Driving at vehicle speed of 40 km/h (25 mph)

HINT:

The wavelength becomes shorter as the vehicle speed increases.



WAVEFORM 6


A292385E05
0.542,1.167 1,1.365 0.458,0.198 10 false GND 0.125,0.125 0.948,0.354 0.823,0.229 10 false 5 V/DIV. 1.75,1.917 2.854,2.104 1.104,0.188 10 false 10 msec./DIV.

Engine Speed Signal
ECM Terminal Name Between TACH and E1
Tester Range 5 V/DIV., 10 msec./DIV.
Condition Idling with warm engine

HINT:

The wavelength becomes shorter as the engine speed increases.



WAVEFORM 7


A346499E01
2.76,0.073 3.385,0.292 0.625,0.219 10 false 10 V/DIV. 1.104,1.865 2.083,2.042 0.979,0.177 10 false 20 msec./DIV. 3.031,1.01 3.365,1.208 0.333,0.198 10 false GND

Pre-stroke Control Valve Signal
ECM Terminal Name Between PCV+ and PCV-
Tester Range 10 V/DIV., 20 msec./DIV.
Condition Idling with warm engine

HINT:

The waveform varies depending on pre-stroke control valve operation.



WAVEFORM 8


A287796E13
2.604,1.625 3.063,1.823 0.458,0.198 10 false GND 0.063,0.063 0.781,0.292 0.719,0.229 10 false 1 V/DIV. 1.167,1.927 2.156,2.135 0.99,0.208 10 false 2 msec./DIV.

Engine Speed Signal
ECM Terminal Name Between NEO and E1
Tester Range 1 V/DIV., 2 msec./DIV.
Condition Idling with warm engine


WAVEFORM 9


A303296E01
2.802,0.156 3.396,0.385 0.594,0.229 10 false 1 V/DIV. 2.99,1.229 3.333,1.469 0.344,0.24 10 false GND 1.615,1.76 2.719,1.969 1.104,0.208 10 false 10 msec./DIV.

CAN Communication Signal
ECM Terminal Name Between CANL and E1
Tester Range 1 V/DIV., 10 msec./DIV.
Condition Engine stopped, engine switch on (IG)

HINT:

The waveform varies depending on the CAN communication signal.



WAVEFORM 10


A303295E01
2.771,0.167 3.385,0.375 0.615,0.208 10 false 1 V/DIV. 2.958,1.25 3.344,1.5 0.385,0.25 10 false GND 1.573,1.781 2.625,2.031 1.052,0.25 10 false 10 msec./DIV.

CAN Communication Signal
ECM Terminal Name Between CANH and E1
Tester Range 1 V/DIV., 10 msec./DIV.
Condition Engine stopped, engine switch on (IG)

HINT:

The waveform varies depending on the CAN communication signal.



WAVEFORM 11


A349005E01
1.177,2.49 2.188,2.688 1.01,0.198 10 false 10 msec./DIV. 2.917,1.896 3.271,2.104 0.354,0.208 10 false GND 2.698,0.792 3.292,0.99 0.594,0.198 10 false 2 V/DIV.

LIN Communication Signal
ECM Terminal Name Between LIN and E1
Tester Range 2 V/DIV., 10 msec./DIV.
Condition Engine stopped, engine switch on (IG)

HINT:

The waveform varies depending on the LIN communication signal.



WAVEFORM 12


A282378E02
2.729,0.583 3.281,0.76 0.552,0.177 10 false 2 V/DIV. 1.625,2.677 2.583,2.865 0.958,0.188 10 false 10 msec./DIV. 3.031,2.271 3.396,2.458 0.365,0.188 10 false GND

LIN Communication Signal
ECM Terminal Name Between CINJ and E1
Tester Range 2 V/DIV., 10 msec./DIV.
Condition Idling with warm engine

HINT:

The waveform is output every 250 msec.