Home › Vehicle Exterior › BODY DIMENSIONS › REAR DOOR
BM3250E _01 Vehicle Exterior _040399 BODY DIMENSIONS _0187330 REAR DOOR F

BODY DIMENSIONS  REAR DOOR  THREE-DIMENSIONAL DISTANCE  


for Double Cab


HINT:
·

Use point L when performing centering measurements for the body dimensions.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Roof Side Rail Assembly Mark -
B, b Rear Door Hinge Installation Nut M8 (0.31)
C, c Rear Door Hinge Installation Nut M8 (0.31)
D, d Center Body Pillar Assembly Mark -
E, e Center Body Pillar Assembly Mark -
F, f Rocker Panel Assembly Mark -
G, g Roof Side Rail Assembly Mark -
H, h Quarter Panel Assembly Mark -
J, j Quarter Panel Assembly Mark -
K, k Rear Door Lock Striker Installation Nut M8 (0.31)
L Front Floor Panel Reinforcement Standard Hole φ10 (0.39)

K123639C01
0.417,6.677 0.729,6.833 0.313,0.156 10 false *a 0.083,8.677 0.396,8.833 0.313,0.156 10 false *b
*a Distance between points other than those above *b mm
(in.)


K123640C01
0.104,8.667 0.417,8.823 0.313,0.156 10 false *a
*a mm
(in.)
- -