Home › Vehicle Exterior › BODY DIMENSIONS › FRAME(for 4WD and Pre-Runner)
BM3250E _01 Vehicle Exterior _040399 BODY DIMENSIONS _0187336 FRAME(for 4WD and Pre-Runner) F

BODY DIMENSIONS  FRAME(for 4WD and Pre-Runner)  TWO-DIMENSIONAL DISTANCE  


for Double Cab


a.

Upper Face

HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Body Mounting Hole φ26 (1.02)
B, b Shock Absorber Installation Hole φ12.2 (0.48)
C, c Body Mounting Hole φ31 (1.22)
D, d Side Rail Inner Channel Standard Hole 16X16
(0.63X0.63)
E, e Body Mounting Hole φ75 (2.95)
F, f Rear Body Mounting Nut M12 (0.47)
G, g Rear Body Mounting Hole φ24 (0.94)
H, h Rear Body Mounting Hole φ24 (0.94)

Wheel Base
Wheel Base 3085 mm (121.46 in.)

K123667C01
3.5,0.01 3.813,0.167 0.313,0.156 10 false *A 2.75,0.677 3.063,0.833 0.313,0.156 10 false *B 4.25,0.677 4.563,0.833 0.313,0.156 10 false *C 0.083,8.667 0.396,8.823 0.313,0.156 10 false *a
*A FRONT *B LH
*C RH - -
*a mm
(in.)
- -


K123674C01
0.333,3.469 0.333,4.167 0.333,4.167 0.667,4.167 false 0.75,4.083 1.063,4.24 0.313,0.156 10 false *a 1.188,5.51 1.5,5.667 0.313,0.156 10 false *b 0.083,8.667 0.396,8.823 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -



b.

Lower Face

HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Bumper Reinforcement Installation Nut M10 (0.39)
B, b Stabilizer Bracket Installation Nut M10 (0.39)
C, c Suspension Lower Arm Installation Hole 16.5X34.5
(0.65X1.36)
D, d Suspension Lower Arm Installation Hole 16.5X34.5
(0.65X1.36)
E, e Side Rail Inner Channel Standard Hole 16X16
(0.63X0.63)
F, f Rear Spring Front Hanger Hole φ14.6 (0.57)
G, g Rear Bumper Mounting Bracket Standard Hole φ9 (0.35)
H, h Rear Spring Rear Hanger Hole φ30.35 (1.19)
J, j Side Rail Outer Channel Standard Hole φ13 (0.51)

Wheel Base
Wheel Base 3085 mm (121.46 in.)

K123681C01
3.5,0.01 3.813,0.167 0.313,0.156 10 false *A 4.25,0.677 4.563,0.833 0.313,0.156 10 false *B 2.75,0.677 3.063,0.833 0.313,0.156 10 false *C 0.083,8.667 0.396,8.823 0.313,0.156 10 false *a
*A FRONT *B LH
*C RH - -
*a mm
(in.)
- -


K123688C01
0.333,3.469 0.333,4.167 0.333,4.167 0.667,4.167 false 0.75,4.083 1.063,4.24 0.313,0.156 10 false *a 1.188,5.51 1.5,5.667 0.313,0.156 10 false *b 0.083,8.667 0.396,8.823 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -




for Single Cab


a.

Upper Face

HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Body Mounting Hole φ26 (1.02)
B, b Shock Absorber Installation Hole φ12.2 (0.48)
C, c Body Mounting Hole φ31 (1.22)
D, d Side Rail Inner Channel Standard Hole 16X16
(0.63X0.63)
E, e Body Mounting Hole φ27 (1.06)
F, f Rear Body Mounting Hole φ23 (0.91)
G Rear Body Mounting Hole 23X15
(0.91X0.59)
g Rear Body Mounting Hole φ15 (0.59)
H, h Rear Body Mounting Hole φ24 (0.94)
J, j Rear Body Mounting Hole φ24 (0.94)

Wheel Base
Wheel Base 3085 mm (121.46 in.)

K123670C01
3.5,0.01 3.813,0.167 0.313,0.156 10 false *A 2.771,0.667 3.083,0.823 0.313,0.156 10 false *B 4.25,0.677 4.563,0.833 0.313,0.156 10 false *C 0.083,8.667 0.396,8.823 0.313,0.156 10 false *a
*A FRONT *B LH
*C RH - -
*a mm
(in.)
- -


K123677C01
0.333,3.469 0.333,4.167 0.333,4.167 0.667,4.167 false 0.75,4.094 1.063,4.25 0.313,0.156 10 false *a 1.188,5.51 1.5,5.667 0.313,0.156 10 false *b 0.083,8.667 0.396,8.823 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -



b.

Lower Face

HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Bumper Reinforcement Installation Nut M10 (0.39)
B, b Stabilizer Bracket Installation Nut M10 (0.39)
C, c Suspension Lower Arm Installation Hole 16.5X34.5
(0.65X1.36)
D, d Suspension Lower Arm Installation Hole 16.5X34.5
(0.65X1.36)
E, e Side Rail Inner Channel Standard Hole 16X16
(0.63X0.63)
F, f Rear Spring Front Hanger Hole φ14.6 (0.57)
G, g Rear Bumper Mounting Bracket Standard Hole φ9 (0.35)
H, h Rear Spring Rear Hanger Hole φ30.35 (1.19)
J, j Side Rail Outer Channel Standard Hole φ13 (0.51)

Wheel Base
Wheel Base 3085 mm (121.46 in.)

K123684C01
3.5,0.01 3.813,0.167 0.313,0.156 10 false *A 4.25,0.667 4.563,0.823 0.313,0.156 10 false *B 2.771,0.667 3.083,0.823 0.313,0.156 10 false *C 0.083,8.667 0.396,8.823 0.313,0.156 10 false *a
*A FRONT *B LH
*C RH - -
*a mm
(in.)
- -


K123691C01
0.333,3.469 0.333,4.167 0.333,4.167 0.667,4.167 false 0.75,4.094 1.063,4.25 0.313,0.156 10 false *a 1.188,5.51 1.5,5.667 0.313,0.156 10 false *b 0.104,8.677 0.417,8.833 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -




for Smart Cab


a.

Upper Face

HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Body Mounting Hole φ26 (1.02)
B, b Shock Absorber Installation Hole φ12.2 (0.48)
C, c Body Mounting Hole φ31 (1.22)
D, d Side Rail Inner Channel Standard Hole 16X16
(0.63X0.63)
E, e Body Mounting Hole φ75 (2.95)
F Rear Body Mounting Hole 23X15
(0.91X0.59)
f Rear Body Mounting Hole φ15 (0.59)
G, g Rear Body Mounting Hole φ24 (0.94)
H, h Rear Body Mounting Hole φ24 (0.94)

Wheel Base
Wheel Base 3085 mm (121.46 in.)

K123672C01
3.5,0.01 3.813,0.167 0.313,0.156 10 false *A 2.771,0.677 3.083,0.833 0.313,0.156 10 false *B 4.25,0.667 4.563,0.823 0.313,0.156 10 false *C 0.083,8.667 0.396,8.823 0.313,0.156 10 false *a
*A FRONT *B LH
*C RH - -
*a mm
(in.)
- -


K123679C01
0.333,3.469 0.333,4.167 0.333,4.167 0.667,4.167 false 0.75,4.083 1.063,4.24 0.313,0.156 10 false *a 1.188,5.51 1.5,5.667 0.313,0.156 10 false *b 0.083,8.667 0.396,8.823 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -



b.

Lower Face

HINT:
·

Length measurements are indicated at the points where the arrows extending from the zero point intersect the lines that extend towards the outside of the illustration from each point.

·

In cases in which only one dimension is given, left and right are symmetrical.

·

For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).



Measuring Point Name
Symbol Name Hole Diameter
mm (in.)
A, a Bumper Reinforcement Installation Nut M10 (0.39)
B, b Stabilizer Bracket Installation Nut M10 (0.39)
C, c Suspension Lower Arm Installation Hole 16.5X34.5
(0.65X1.36)
D, d Suspension Lower Arm Installation Hole 16.5X34.5
(0.65X1.36)
E, e Side Rail Inner Channel Standard Hole 16X16
(0.63X0.63)
F, f Rear Spring Front Hanger Hole φ14.6 (0.57)
G, g Rear Bumper Mounting Bracket Standard Hole φ9 (0.35)
H, h Rear Spring Rear Hanger Hole φ30.35 (1.19)
J, j Side Rail Outer Channel Standard Hole φ13 (0.51)

Wheel Base
Wheel Base 3085 mm (121.46 in.)

K123686C01
3.5,0.01 3.813,0.167 0.313,0.156 10 false *A 4.25,0.677 4.563,0.833 0.313,0.156 10 false *B 2.771,0.677 3.083,0.833 0.313,0.156 10 false *C 0.083,8.667 0.396,8.823 0.313,0.156 10 false *a
*A FRONT *B LH
*C RH - -
*a mm
(in.)
- -


K123693C01
0.333,3.469 0.333,4.167 0.333,4.167 0.667,4.167 false 0.771,4.094 1.083,4.25 0.313,0.156 10 false *a 1.188,5.51 1.5,5.667 0.313,0.156 10 false *b 0.083,8.677 0.396,8.833 0.313,0.156 10 false *c
*a Imaginary Datum Line *b Height from Imaginary Datum Line
*c mm
(in.)
- -