Home › Vehicle Exterior › BODY WELD POINT › ROCKER OUTER PANEL(for Double Cab)
BM3250E _01 Vehicle Exterior _040520 BODY WELD POINT _0187873 ROCKER OUTER PANEL(for Double Cab) F

BODY WELD POINT  ROCKER OUTER PANEL(for Double Cab)  CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)  


K123716

REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108827

Cut and Join Location
K108828

Cut Location for Supply Parts

K123806C01
2.021,3.51 2.333,3.667 0.313,0.156 10 false *a
*a 200 mm (7.87 in.) - -


K123807


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108831

Butt Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K123808C01
2,3.583 2.167,3.583 2.167,3.583 2.365,3.25 false 1.844,3.5 2.156,3.656 0.313,0.156 10 false *1
*1 FRONT BODY PILLAR UPPER OUTER - -



c.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.