Home › Vehicle Exterior › BODY WELD POINT › QUARTER PANEL(for Double Cab)
BM3250E _01 Vehicle Exterior _040520 BODY WELD POINT _0187876 QUARTER PANEL(for Double Cab) F

BODY WELD POINT  QUARTER PANEL(for Double Cab)  CUT AND JOIN REPLACEMENT SECTIONS  


K123721

REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location
K108828

Cut Location for Supply Parts

K123821

K123822C01
4.51,1.458 4.823,1.615 0.313,0.156 10 false *a
*a 20 mm (0.79 in.) - -


K123823


INSTALLATION


Symbol Meaning
K108821

Spot Weld
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108831

Butt Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K123824C01
5.271,2.083 5.667,2.583 5.667,2.583 5.833,2.583 false 5.865,2.5 6.177,2.656 0.313,0.156 10 false *1
*1 QUARTER PANEL - -


K123825


c.

After welding, apply the foamed sealing material to the corresponding parts. (See the painting/coating)


d.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


e.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.