Home › Vehicle Exterior › BODY WELD POINT › QUARTER PANEL(for Smart Cab)
BM3250E _01 Vehicle Exterior _040520 BODY WELD POINT _0187878 QUARTER PANEL(for Smart Cab) F

BODY WELD POINT  QUARTER PANEL(for Smart Cab)  CUT AND JOIN REPLACEMENT SECTIONS  


K123723

REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108827

Cut and Join Location

K123833

K123834C01
1.552,0.542 1.865,0.698 0.313,0.156 10 false *a 4.698,1.396 5.01,1.552 0.313,0.156 10 false *b
*a 340 mm (13.39 in.) *b 20 mm (0.79 in.)


K123835


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108824

Plug Weld
K108831

Butt Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K123836C01
6.5,3.25 6.333,3.25 6.333,3.25 5.979,2.75 false 6.531,3.156 6.844,3.313 0.313,0.156 10 false *1
*1 QUARTER PANEL - -


K123837


c.

After welding, apply the foamed sealing material to the corresponding parts. (See the painting/coating)


d.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


e.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.