Home › Vehicle Exterior › BODY WELD POINT › ROOF PANEL(for Smart Cab)
BM3250E _01 Vehicle Exterior _040520 BODY WELD POINT _0187886 ROOF PANEL(for Smart Cab) F

BODY WELD POINT  ROOF PANEL(for Smart Cab)  ASSEMBLY REPLACEMENT  


K123731

REMOVAL


Symbol Meaning
K108818

Remove Weld Points

K123870

K123871


INSTALLATION


Symbol Meaning
K108821

Spot Weld
K108823

Plug Weld
K108834

Body Sealer

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


c.

Before temporarily installing the new parts, apply body sealer to the roof panel reinforcement.

HINT:

Apply enough body sealer to the panels.


K123872C01
3.083,3.5 3.25,3.5 3.25,3.5 3.448,3.104 false 4.75,3.5 4.583,3.5 4.583,3.5 4.417,3.104 false 4.781,3.417 5.094,3.573 0.313,0.156 10 false *1 2.917,3.417 3.229,3.573 0.313,0.156 10 false *1
*1 ROOF PANEL REINFORCEMENT - -



d.

Before temporarily installing the new parts, weld the roof panel and roof panel reinforcement with the standard number of welding points.

K123873C01
3,3.5 3.167,3.5 3.167,3.5 3.448,3.115 false 4.833,3.5 4.667,3.5 4.667,3.5 4.417,3.125 false 5.177,1.917 5.5,1.583 5.5,1.583 5.667,1.583 false 5.708,1.5 6.021,1.656 0.313,0.156 10 false *1 2.833,3.417 3.146,3.573 0.313,0.156 10 false *2 4.865,3.417 5.177,3.573 0.313,0.156 10 false *2
*1 ROOF PANEL *2 ROOF PANEL REINFORCEMENT



e.

Before temporarily installing the new parts, apply body sealer to the windshield header panel.

HINT:

Apply enough body sealer to the panels.


K123874C01
1.5,3.5 1.667,3.5 1.667,3.5 2.177,2.979 false 1.333,3.417 1.646,3.573 0.313,0.156 10 false *1
*1 WINDSHIELD HEADER PANEL - -


K123875

K123876


f.

After welding, apply the foamed sealing material to the corresponding parts. (See the painting/coating)


g.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


h.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.