Home › Engine / Hybrid System › 1TR-FE ENGINE CONTROL › SFI SYSTEM
NM3250E _51 Engine / Hybrid System _040045 1TR-FE ENGINE CONTROL _0185044 SFI SYSTEM CO CONTROL F

1TR-FE ENGINE CONTROL  SFI SYSTEM  CONTROL  ELECTRONIC THROTTLE CONTROL SYSTEM-intelligent (ETCS-i) CONTROL  


FUNCTION


a.

The Electronic Throttle Control System-intelligent (ETCS-i) is used, providing excellent throttle control in all the operating ranges. An accelerator pedal position sensor has been provided on the accelerator pedal.


b.

The ETCS-i uses the ECM to calculate the optimal throttle valve opening that is appropriate for the respective driving conditions and uses a throttle control motor to control the opening.


c.

The ETCS-i controls the Idle Speed Control (ISC) system.


d.

In case of an abnormal condition, this system switches to limp mode.

W126239E01
4.313,0.927 4.458,0.406 4.458,0.406 4.708,0.406 true 3.198,0.74 3.365,0.146 3.365,0.146 3.615,0.146 true 1.854,0.823 1.667,0.5 1.667,0.5 1.417,0.5 true 2.667,3.25 2.5,3.583 2.5,3.583 2.25,3.583 true 3.646,0.052 4.563,0.25 0.917,0.198 10 false Throttle Valve 4.75,0.323 6.302,0.583 1.552,0.26 10 false Throttle Position Sensor 4.958,0.802 6.375,1.031 1.417,0.229 10 false Throttle Control Motor 5.073,2.135 6.531,2.333 1.458,0.198 10 false Ignition Coil Assembly 5.063,2.844 6.521,3.042 1.458,0.198 10 false Fuel Injector Assembly 3.427,2.688 3.885,2.885 0.458,0.198 10 false ECM 1.438,3.5 2.396,3.75 0.958,0.25 10 false CAN (V Bus) 0.917,3.052 2.167,3.219 1.25,0.167 10 false Skid Control ECU* 0.771,2.135 2.188,2.5 1.417,0.365 10 false Intake Mass Air Flow Meter Sub-assembly 0.313,0.417 1.479,0.833 1.167,0.417 10 false Accelerator Pedal Position Sensor 4.917,3.5 6.25,3.698 1.333,0.198 10 false *: Models with VSC

Controls of ETCS-i
Idle Speed Control (ISC) The ECM controls the throttle valve in order to constantly maintain an ideal idle speed.
Brake Control Coordination Control* The ECM ensures vehicle stability by controlling the throttle valve opening angle according to request signals received from the skid control ECU in order to maximize the effectiveness of the brake control system through cooperation with the skid control ECU.

*: Models with VSC



e.

The ECM drives the throttle control motor by determining the target throttle valve opening in accordance with the respective operating conditions.


f.

The ECM controls the throttle to an optimal throttle valve opening that is appropriate for the driving conditions, such as the amount of accelerator pedal effort and the engine speed, in order to achieve excellent throttle control and comfort in all operating ranges.

Control Examples during Acceleration and Deceleration
W102921E06
5.781,0.115 6.75,0.5 0.969,0.385 10 false : With control 5.792,0.49 6.938,0.927 1.146,0.438 10 false : Without control 0.802,0.823 2.333,1.208 1.531,0.385 10 false Vehicle's Longitudinal G 0.521,1.979 2.375,2.323 1.854,0.344 10 false Throttle Valve Opening Angle 0.125,2.885 2.365,3.302 2.24,0.417 10 false Accelerator Pedal Depression Angle 5.333,3.438 5.781,3.74 0.448,0.302 10 false Time